21227
80
Zoom out
Zoom in
Previous page
1/96
Next page
80
The picture from equipment connected to the
recorder’s input jack does not appear on the
screen.
, If the equipment is connected to the LINE 1-TV
jack, select “LINE 1” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 2 IN
jacks, select “LINE 2” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 4 IN
jacks, select “LINE 4” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 3/
DECODER jack, select “LINE 3” in the front
panel display by pressing INPUT SELECT.
If the equipment is connected to the DV IN jack,
(this is usually for a digital video camera
connection), select “DV” in the front panel
display by pressing INPUT SELECT.
The playback picture or TV programme from
the equipment connected through the recorder
is distorted.
, If the playback picture output from a DVD
player, VCR, or tuner goes through your recorder
before reaching your TV, the copy-protection
signal applied to some programmes could affect
picture quality. Disconnect the playback
equipment in question and connect it directly to
your TV.
The picture does not fill the screen.
, Set [TV Aspect] in [Settings] Setup in
accordance with the aspect ratio of your TV
(page 73).
The picture does not fill the screen, even
though the aspect ratio is set in [TV Aspect] in
[Settings] Setup.
, The aspect ratio of the disc is fixed on your DVD.
The picture is black and white.
, If you are using a SCART cord, be sure to use
one that is fully wired (21 pins).
Sound
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the amplifier or the
connection to the amplifier is incorrect.
, The recorder is in reverse play, fast forward,
slow motion, or pause mode.
, If the audio signal does not come through the
DIGITAL OUT (OPTICAL or COAXIAL)
jacks, check the [Audio] Setup settings
(page 75).
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE 2 OUT (AUDIO
L/R) jacks, LINE 1-TV jack, or LINE 3/
DECODER jack (page 51).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
[Audio DRC] in [Audio] Setup to [On]
(page 76).
An alternate audio track cannot be recorded or
played.
, If an audio channel other than “Main+Sub” is
selected, you cannot record both main and sub
sounds. Check the selected audio channel before
you start recording.
, If you have connected an AV amplifier to the
DIGITAL OUT (OPTICAL or COAXIAL) jack
and want to change the audio track during
playback, set [Dolby Digital] in [Audio] Setup to
[D-PCM] (page 75).
Playback
The disc does not play.
, The disc is upside down. Insert the disc with the
playback side facing down.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder.
Remove the disc and leave the recorder turned on
for about half an hour until the moisture
evaporates.
, If the disc was recorded on another recorder, the
recorder cannot play the disc if it was not
finalized (page 35).
The disc does not start playback from the
beginning.
, Resume play was activated (page 48).
, You have inserted a disc whose Title menu or
DVD menu automatically appears on the TV
screen when it is first inserted. Use the menu to
start playback.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDR-GX210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDR-GX210 in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RDR-GX210

Sony RDR-GX210 User Manual - German - 108 pages

Sony RDR-GX210 User Manual - Dutch - 104 pages

Sony RDR-GX210 User Manual - French - 108 pages

Sony RDR-GX210 User Manual - Portuguese - 104 pages

Sony RDR-GX210 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info