635801
101
Zoom out
Zoom in
Previous page
1/112
Next page
Error/Warning Indications
101
Appendices
The following caution and operation confirmation indications may be displayed on the center area of the
screen. In this case, please see the following table.
1)“Media(B)” for the card in slot B.
Caution and Operation Confirmation Indications
Indication Cause and measures
Battery Error
Please Change Battery
An error was detected with the battery pack.
Replace the battery pack with a normal one.
Backup Battery End
Please Change
The remaining power of the backup battery is insufficient.
Replace the battery pack.
Unknown Media(A)
1)
Please Change
A partitioned memory card or one that contains recorded clips exceeding the
number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and load a compatible
card.
Cannot Use Media(A)
1)
Unsupported File System
A card of a different file system or an unformatted card was inserted.
It cannot be used with this camcorder. Replace it or format it with this
camcorder.
Media Error
Media(A) Needs to be Restored
1)
An error occurred with the memory card. The card requires restoration.
Restore the card.
Media Error
Cannot Record to Media(A)
1)
Recording cannot be done, because the memory card is defective.
Because playback may be possible, it is recommended to replace it with another
card after copying the clips, as required.
Media Error
Cannot Use Media(A)
1)
Neither recording nor playback can be done, because the memory card is
defective.
It cannot be operated with this camcorder. Replace it with another card.
Media(A) Error
1)
Recording Halted
Playback Halted
Recording or playback stops, because an error occurred with the memory card.
If this frequently occurs, change the memory card.
Media Reached Rewriting Limit
Change Media (A)
1)
The memory card has come to the end of its service life.
Make a backup copy and replace the card with another one as soon as possible.
Recording/playback may not be performed properly if you continue to use the
card.
For details, refer to the operating instructions of the memory card.
Copy All MPEG2 Proxy
NG: Reached Clip Number Limit
NG: Same File Already Exists
NG: Not Enough Capacity
Copying of all the MPEG2 Proxy is not completed because of the displayed
reason.
The maximum number of clips is reached.
There is a file with the same name.
There is not enough capacity for copying.
Replace the Media.
Fan Stopped The fan in the camcorder has stopped.
Avoid use under high temperature conditions. Turn the camcorder off and
contact a Sony service representative.
Invalid setting value was reset:
Media/Clip Naming/Camera
Position
Please save All File again
The setting value of “Clip Naming” is reset because an incorrect All file is
loaded.
Save the All file again after setting the desired setting value.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X180 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info