635801
87
Zoom out
Zoom in
Previous page
1/112
Next page
Connecting External Monitors and Recording Devices
87
External Devices Connection
To display recording or playback pictures on an
external monitor, select the output signal and use
an appropriate cable for the monitor to be
connected.
An output signal from the camcorder can be
recorded when a recording device is connected.
The same status information and menus can be
displayed on the external monitor as those on the
viewfinder screen.
According to the signal fed to the monitor, set
“Output Display” (page 74) in the Video menu to
“On.”
SDI OUT connector (BNC type)
Set the on/off setting of the output, and the output
format in the Video menu (page 74).
Use a commercially available 75-ohm coaxial
cable for connection.
Notes
Be sure to ground between the camcorder and external
device before turning the power on. (We recommend
to turn on the camcorder and external device after
connecting a 75-ohm coaxial cable.)
When connecting an external device to the camcorder
while the camcorder is turned on, connect the external
device after connecting a 75-ohm coaxial cable to the
external device.
To start synchronized recording on an external
device
With SDI signal output selected, synchronized
recording is possible by feeding a REC trigger
signal to an external recording device connected
via the SDI OUT connector. To enable
synchronized recording, set “SDI/HDMI Rec
Control(page 79) of the Recording menu to
“On.”
Notes
When a connected external device does not correspond
to a REC trigger signal, the device cannot be operated.
HDMI OUT connector (Type A connector)
Set the on/off setting of the output, and the output
format in the Video menu (page 74).
Use a commercially available high speed HDMI
cable for connection.
GENLOCK/VIDEO connector (BNC type)
The GENLOCK/VIDEO connector can output
the HD-Y signal, HD-Sync Signal, or the down-
converted SD analog composite signal for the
monitor by changing the setting in “Output
Format” of the Video menu.
Use the commercially available BNC cable for
connection.
For details, see “Video Formats and Output
Signals” (page 97).
AUDIO OUT connector (3.5 mm stereo pin
connector)
The AUDIO OUT connector can output 2 channel
audio signals.
Use the supplied audio connecting cable for
connection.
External Devices Connection
Connecting External Monitors and Recording Devices
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X180 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info