635801

Sony PXW-X180 Manual

33
Zoom out
Zoom in
Previous page
1/112
Next page
Changing Basic Settings
33
Recording
Memory A mode, Memory B mode
The white balance is adjusted to the value stored
in memory A or memory B.
Pressing the WB SET button A executes auto
white balance and stores the adjusted value in
memory A or memory B.
ATW (Auto-Tracing White balance) mode
In this mode, the camcorder automatically adjusts
the white balance to the appropriate condition.
When the color temperature of the light source
changes, the white balance adjustment is
automatically executed.
Five steps of adjustment speed can be selected
with “ATW Speed” in “White” (page 67) of the
Paint menu.
When the ATW Hold function is assigned to an
assignable button (page 36), you can
momentarily hold the ATW value to fix the white
balance, even in ATW mode, by pressing the
button.
Notes
• Under some conditions of lighting or the shooting
subject, adjustment by ATW may fail to provide
proper colors.
Examples:
—When the subject that occupies most of the frame
is mostly one color, like the sky, sea, ground,
grass, or certain kinds of flowers.
—When the subject is under a light source of
extremely high or extremely low color
temperature.
If execution of automatic tracing by the ATW
function takes an unacceptably long time or only
results in an inadequate effect, execute the Auto
White Balance function.
Using the switch
Make a selection with the WHT BAL switch B.
B: ATW mode or Memory B mode
A: Memory A mode
PRESET: Preset mode
The B position of the WHT BAL switch is
assigned to ATW mode at the factory. The setting
can be changed with “White Switch<B>” in
“White” (page 67) of the Paint menu to select
Memory B mode.
Setting the camcorder to Full Auto mode
(page 27) forcibly activates ATW mode.
Assigning the ATW on/off function to an
assignable button (page 36) permits you to
independently activate/deactivate ATW when
Full Auto mode is off.
Executing Auto White Balance
1 To store the adjustment value in
memory, select Memory A or Memory
B mode.
2 Place a white subject under the same
lighting condition and zoom in on it so
that a white area is obtained on the
screen.
3 Adjust the brightness.
Adjust Iris as instructed in “Adjusting the iris
(Manual mode)” (page 31).
4 Press the WB SET button A.
When you execute the adjustment in a
memory mode, the adjusted value is stored in
memory (A or B) selected in step 1.
When you execute the adjustment in ATW
mode, adjustment in ATW is resumed.
Notes
• Auto white balance adjustment cannot be performed
when in Preset mode.
• If auto white balance adjustment fails, an error
message is displayed on the screen for approximately
3 seconds. If the error message continues to be
displayed after several attempts, consult your Sony
service representative.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X180 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info