635802
17
Zoom out
Zoom in
Previous page
1/112
Next page
Power Supply
17
Preparations
You can use a battery pack or AC power via an
AC adaptor.
For safety, use only the Sony battery packs and
AC adaptor listed below:
Lithium-ion Battery Pack
BP-U30
BP-U60
BP-U60T
BP-U90
Charger
BC-U1
BC-U2
AC Adaptor (supplied)
ACDP-060S01
Notes
The BC-U1/BC-U2 Charger cannot be used as the
external power source device for the camcorder.
When connecting the camcorder to the wall outlet (wall
socket), use the supplied AC adaptor.
Fully insert the battery pack into the battery pack
receptacle (page 10), then slide it down to lock it.
To remove the battery pack, press and hold the
BATT RELEASE button (page 10), slide the
battery pack upward to unlock it, then pull it out.
Notes
Before use, charge the battery pack with the supplied
BC-U1 or BC-U2 Charger.
A warm battery pack immediately after use may not be
able to be fully recharged.
The high-capacity BP-U90 Battery Pack is large, and
protrudes from the camcorder when attached. When
using the camcorder with the BP-U90 attached for
extended recording periods, Sony recommends
attaching the camcorder to a tripod for convenience.
Checking battery charge remaining
When recording or playback is in progress on the
battery pack, an icon to show the current battery
charge level and usage time remaining are
displayed on the LCD/viewfinder screen
(page 15).
The camcorder indicates the remaining usage
time in minutes by calculating the available time
with the battery pack if operation is continued at
the current rate of power consumption.
If the battery charge remaining becomes
low
If the battery charge remaining decreases to a
certain level during operation (Low BATT
status), a low-battery message, flashing of the
recording/tally lamp, and a beep sound will warn
you.
If the battery charge remaining further decreases
to a level at which operation cannot be continued
(BATT Empty status), a battery-empty message
appears.
Replace the battery pack with one that is fully
charged.
To change the message levels
The Low BATT level is set to 10% of full charge,
and the BATT Empty level is set to 3% of full
charge at the factory. These settings can be
changed with “Battery Alarm” (page 86) in the
System menu.
Preparations
Power Supply
Using a battery pack
Icon Remaining
100% to 91%
90% to 71%
70% to 51%
50% to 31%
30% to 11%
10% to 0%
17


Need help? Post your question in this forum.

Forumrules
1

Forum

sony-pxw-x160

Reset search

  • After resetting my sony pxw-x160 whenever i try to record on as sd card it says clip number limit reached Submitted on 13-12-2021 at 12:34

    Reply Report abuse
    • Please given me price..
      1-487-447-11 switch block, control
      alaminsajb@gmail.com
      Answered on 19-1-2022 at 12:17

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PXW-X160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PXW-X160 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info