15012

Sony PS2_SCPH39001N Manual

16
Zoom out
Zoom in
Previous page
1/92
Next page
16
4 A disc that cannot be played with the
PlayStation
®
2 console is inserted.
Ending a game
1...... Press the A button.
The disc tray opens.
2...... Remove the disc.
3...... Press the A button.
The disc tray closes.
4...... Press the 1/RESET button for about two
seconds.
The 1 indicator turns red and the console
enters standby mode.
Notes
• When playing an online software title, you can use the
1/reset button on the console front to quit the title.
Note that you cannot use this button to restart the title.
• To quit an online software title, follow the on-screen
instructions or the instructions in the software manual.
• If you cannot find instructions, you can quit by
pressing the 1/reset button. The 1 indicator will turn
red when the console has entered standby mode.
• If you are not able to quit using the method above, you
can force the software to quit by pressing and holding
down the 1/reset button until the 1 indicator turns
red.
4,6
2
5
1
3
Starting a game
Playing a game
1
2
3
Turn on the console using the
MAIN POWER switch on the
back of the console.
The 1 (standby) indicator on the
front of the console lights up in red
to indicate that the console is now in
standby mode.
Press the 1 (standby) /RESET
button.
The 1 indicator turns green and the
start-up screen appears.
Plug the analog controller
(DUALSHOCK
®2) or analog
controller (DUALSHOCK
®) into
the console.
Press the A (open) button.
The disc tray opens.
Place a disc on the disc tray
with the label side facing up
(data side down).
Press the A button.
The disc tray closes. Screen 2 or 3
appears and the game is ready to
begin.
Note
Set the analog controller (DUALSHOCK®2) or analog
controller (DUALSHOCK
®) to the appropriate mode for
the software (page 17). See the appropriate software
manual for details.
4
5
Screens that appear at start-up
When turning on the console without first
inserting a disc
Screen 1 appears.
•When you insert a PlayStation
®
2 or
PlayStation
®
format disc after screen 1 has
appeared, screen 2 or 3 will appear and
you can start the game.
•You can move to the System Configuration
menu or the Browser screen from screen 1.
(For details, see “Using the Main menu” on
page 15.)
When turning on the console with a disc
already inserted
Depending on the type of disc inserted, screen
2, 3 or 4 will appear.
If screen 4 appears, it is possible that the
inserted disc is not a PlayStation
®
or
PlayStation
®
2 format disc. Check the disc type
(page 4).
1 No disc is inserted (Main menu).
2 PlayStation
®
2 format DVD-ROM /
CD-ROM is inserted.
3
PlayStation
®
format CD-ROM is inserted.
6
Restarting a game
Press the 1/RESET button very briefly. (Be
sure not to hold the button down for any length
of time, as that will put the console in standby
mode.)
Be careful not to accidentally press the 1/
RESET button while playing a game, or the
game will restart.
1,3
4
2
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony PS2_SCPH39001N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony PS2_SCPH39001N in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info