150770
28
Zoom out
Zoom in
Previous page
1/52
Next page
28
Editing Recorded MDs
m/M
./>
?/1
Z
N
Xx
.>
z
mM
+
g
YES
MENU/NO
Brief descriptions of buttons
used to edit MDs
The buttons below are used to erase, divide, move,
or combine tracks on the MD.
Note
The operation of these buttons is different when
naming a track or MD. For details, see “Naming
Tracks or MDs” on page 35.
MENU/NO button: Press to edit tracks. While
editing, press to cancel editing.
./> buttons: Press to select an editing
operation or track number. You can also use these
buttons to specify points in a track for erasure or
track division. You can also perform the same
operation by turning ./> on the deck.
YES button: Press to enter a selection. You can
also perform the same operation by pressing
./> on the deck.
m/M buttons: Press to specify the unit
(minute, second, or frame) by which the MD is
advanced when you press ./> repeatedly.
You can also use these buttons to locate the end
point of the portion to be erased.
For further details on the function of each button,
see the sections on editing operations.
About indication which
appears while editing
When “Protected” and “C11”
alternate in the display
The record-protect slot is open. To edit the MD,
slide the tab to close the slot. For details, see “To
prevent accidental erasure of the recorded
material” on page 13.
About indications which
appear after editing
When “TOC” lights up in the
display
Editing has finished but the TOC (Table of
Contents) on the MD has not been updated to
reflect the editing results. The editing will be lost
if you disconnect the AC power adaptor while the
indication is on. The TOC will be updated only
when you eject the MD or turn off the MD deck.
When “TOC Writing” flashes in
the display
The deck is updating the TOC. Do not disconnect
the AC power adaptor or move the deck while the
indication flashes.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony nw-a3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony nw-a3000 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info