577548
91
Zoom out
Zoom in
Previous page
1/117
Next page
91
Table of Contents Search image Index
GB
press START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.
Photo shooting is slow.
The noise reduction function is working. This
is not a malfunction.
The horizontal to vertical ratio of the
movie (16:9 (wide)/4:3) cannot be
changed.
The horizontal to vertical ratio of high
definition image quality (HD) movies is 16:9
(wide).
The auto focus does not function.
The subject is too close. Check the minimum
shooting distance of the lens.
Ambient light is insufficient.
The recording conditions are not suitable for
a
uto focus. Adjust the focus manually (p. 41).
SteadyShot does not function.
Attach a lens compatible with the SteadyShot
function.
Set [
SteadyShot] to [Active] or [Standard],
[
SteadyShot] to [On] (p. 76).
Flash shooting cannot be done.
Turn on the external flash (sold separately).
The flash is not attached correctly. Reattach
the flash.
The flash cannot be used for movie shooting.
Fuzzy white circular spots appear on
images shot using a flash.
Particles (dust, pollen, etc.) in the air reflected
the flash light and appeared on the image. This
is not a malfunction.
The image taken with flash is too dark.
If the subject is beyond the flash range (the
distance that the flash can reach), the pictures
will be dark because the flash light does not
reach the subject. If the ISO is changed, the
flash range also changes with it.
The subjects passing by the screen very
fast appear crooked.
This is called the focal plane phenomenon.
This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
image signals, the subjects passing by the lens
rapidly might appear crooked depending on
the recording conditions.
Horizontal stripes appear on the images.
This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
It may be eliminated by adjusting Shutter
Speed.
Black bands appear when you record a TV
screen or computer screen.
Adjust Shutter Speed (p. 47).
[LCD Brightness ] cannot be adjusted.
You cannot adjust [LCD Brightness ] when:
The LCD panel is closed on your camcorder
with the LCD screen facing out.
The power is supplied from the AC Adaptor.
The iris and/or shutter speed icon blinks
when you press PHOTO halfway.
Since the subject is too bright or too dark, it is
beyond the available range of the camcorder.
Adjust the setting again.
The image is washed out (Flaring)
Light glare appears on the image
(Ghosting)
This can occur when shooting backlit subjects.
When using the zoom lens, attach the lens
hood.
The corners of the image are dark.
Remove the filter or hood. Depending on the
thickness of the filter or improper attachment
of the hood, the filter or the hood may
partially appear in the image. The optical
properties of some lenses may cause the
periphery of the image to appear too dark
(insufficient light).
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony NEX-VG20E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony NEX-VG20E in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony NEX-VG20E

Sony NEX-VG20E User Manual - German - 127 pages

Sony NEX-VG20E User Manual - German - 315 pages

Sony NEX-VG20E User Manual - Dutch - 122 pages

Sony NEX-VG20E User Manual - Dutch, French, Italian - 315 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info