160845
61
Zoom out
Zoom in
Previous page
1/84
Next page
NAS-Z200DiR/Z200iR.GB.4-151-738-12(1)
61
GB
Troubleshooting

If you use partitioned USB device, only MP3, WMA
and AAC tracks on the first partition can be played.

Playback is possible up to 8 levels.

The number of folders on the USB device has
exceeded 1,000.

The number of tracks on the USB device has
exceeded 3,000.

Files that are encrypted or protected by passwords,
etc. cannot be played back.
Play Timer
“Set the clock first. appears.

If the clock on the unit has not been set, you cannot
set the Play Timer. Set the clock before setting the
Play Timer (page 23).
“Start and end times cannot be the same.
appears.

The ending time for the Play Timer cannot be the
same as the starting time.
Play Timer setting does not function when the
starting time is reached. Play Timer setting does
not end when the ending time is reached.

A power failure occurred while the timer setting
was in standby mode or the power cord was
disconnected.

The unit is being subjected to shocks or vibrations.
Place the unit at a stable location.
Others
The unit works poorly.

The unit may be under the influence of static
electricity or other factors. In this case, restart the
unit. If the unit still works poorly, reset the unit
(page 62).

If any warning message appears, do as the message
says.
The unit does not respond to any operations. The
unit does not work correctly.

The units internal system may be malfunctioning, or
the unit may be suffering from strong electrical noise
caused by power supply abnormalities due to being
dropped, excessive static electricity, or lightning.
In this case, disconnect the power cord of the main
unit and the remote control charger, wait about 30
seconds, and then reconnect them.
To reset the user-configured settings
This process clears all user-configured settings
and information (e.g., preset radio stations, clock
setting and network settings) to the factory default.
1
Disconnect and reconnect the power
cord of the main unit, and then turn on
the unit.
2
Select [Settings] from the Home menu.
3
Select [Common Setting] – [System
Reset].
“Restore all settings to the factory default and
reboot.” appears in the display.
4
Select [OK].
The system settings are reset.
All user-configured settings, such as preset
radio stations, timer settings, or the clock
settings are deleted.
To cancel the resetting procedure
Select [Cancel] in step 4.
Note
You should never turn off the unit or disconnect the
power cord during the resetting of the system.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony nas z200ir at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony nas z200ir in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony nas z200ir

Sony nas z200ir User Manual - German - 84 pages

Sony nas z200ir User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info