161725
104
Zoom out
Zoom in
Previous page
1/115
Next page
NAC-HD1E.GB.3-213-271-11(1)
104
GB
During the restoration of audio data,
a message similar to the following one
may appear.
[e backup le that you have just been
restored has been subjected to multiple
restorations in the past. In the OpenMG
system, restrictions may be placed on the
restoration of copyrighted materials that
have been restored 4 or more times. is
message appears when the backup le
you are using has been restored 4 or more
times.]

If a restored le becomes invalid due to a
malfunction in a peripheral component
or severe instability in the units system
Consult the local authorized service
facility.

If validation of a le fails even aer many
attempts at validations
Check the computer or hard disk
drive containing the backup data for
damage.
Others
The unit works poorly.

e unit may be under the inuence
of static electricity or other factors. In
this case, restart the unit. If the unit still
works poorly, reset the unit (page 105).

If any warning message appears, do as the
message says.
Five alphanumeric digits appear in the
display.

e self-diagnosis function has activated
(page 105).
ON/STANDBY indicator ashes (red).

e protection function of the internal
power supply has been activated. If this
happens, disconnect the power cord from
the wall outlet and check the connections
between the various components. If there
are no abnormalities, conrm that the
ON/STANDBY indicator is not lit, and
then reconnect the power cord to the
wall outlet.
Digital recording cannot be done.

Digital recording cannot be done if the
source signal contains protections against
digital copying. In this case, connect the
ANALOG IN jacks on the unit to the
analog output jack on the source device
to make an analog recording.
The remote control does not work.

e batteries are weak.

ere are no batteries inside.

Point the remote control at the remote
sensor of the unit (page 10).

An inverter circuit for a uorescent lamp
is near the unit. Move the unit away from
the circuit.
Audio data is corrupted” appears in
the display.

Select [Repair].
The unit vibrates or noise is heard
from the ventilation hole.

e vibration is caused by the fast
rotation of the hard disk and the noise by
the cooling fan. ese are normal and not
malfunctions.
Vibration or noise in the unit increases
during recording of a CD.

e hard disk rotates faster during CD
recording than during CD playback, so
the increase in vibration or noise is not a
malfunction.
e amount of vibration or noise
produced may depend on the CD type.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony nac hd 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony nac hd 1 in the language / languages: English as an attachment in your email.

The manual is 9,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony nac hd 1

Sony nac hd 1 User Manual - German - 115 pages

Sony nac hd 1 User Manual - Dutch - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info