23376
91
Zoom out
Zoom in
Previous page
1/128
Next page
91
PUSH STOP
BUTTON
You tried to open the lid by sliding the OPEN switch while the recorder
was storing disc information with the dedicated USB cable connecting
the recorder to a computer.
, Operation must be done only after pressing x and “SYSTEM FILE
WRITING” has disappeared from the display.
READ ERROR The recorder cannot read the disc information correctly.
, Reinsert the disc.
REC ERROR Recording was not correctly done.
, Place the recorder at a place with no vibrations and record again.
The disc is soiled with an oil film or finger prints, is scratched, or is not a
standard disc.
, Try recording again with another disc.
SYSTEM FILE
WRITING
The recorder is storing information (track start and end position) from
the memory to the disk.
, Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.
TEMP OVER
REC STOP
Heat has built up in the recorder.
, Let the recorder cool down.
TITLE FULL You tried to enter characters that exceeds the maximum number for a
title.
For the European, North American and Australian models:
More than 200 characters to label a single track, group, or disc.
For the Asian, African and tourist models:
More than 100 characters (in Hi-MD mode) or 200 characters (in MD
mode) to label a single track, group, or disc.
You tried to enter characters that exceeds the maximum number for a
disc.
For the European, North American and Australian models:
A total of more than approximately 55,000 characters (in Hi-MD
mode) or 1,700 characters (in MD mode) for titles in a disc.
For the Asian, African and tourist models:
A total of more than approximately 27,000 characters (in Hi-MD
mode) or 1,700 characters (in MD mode) for titles in a disc.
TOC DATA
ERROR
The recorder cannot read the disc information correctly.
, Insert another disc.
, If it is no problem to erase the entire disc, do so (page 61).
TRACK FULL You tried to record more than 2,047 tracks on a disc in Hi-MD mode or
more than 254 tracks on a disc in MD mode.
, Erase unnecessary tracks (page 60).
TRK FROM PC
NO EDIT
You tried to combine or divide tracks that were transferred from the
computer.
, You cannot combine or divide transferred tracks.
You tried to combine or divide tracks that were recorded in Hi-MD mode
using the MD Simple Burner software.
, You cannot combine or divide tracks recorded in Hi-MD mode with
the MD Simple Burner software.
Message Meaning/Remedy
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MZNH1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MZNH1 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony MZNH1

Sony MZNH1 User Manual - French - 124 pages

Sony MZNH1 User Manual - Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info