23382
80
Zoom out
Zoom in
Previous page
1/119
Next page
80
CANNOT
RECORD OR
PLAY
There is no audio data that can be played on the recorder.
The audio data or disc management file has been damaged.
, Erase the whole disc (page 53) or perform the Format function
(page 56).
CANNOT SET You tried to set “Time Mark” during synchro-recording.
You selected “REC Level” while the recorder is not in recording-pause.
, Set “REC Level” while the recorder is in recording-pause.
You tried to make the following settings while recording.
— Recording mode
— Disc Memory
— Play mode
— Selection of “Group REC in menu
Charging The rechargeable battery is being charged.
DATA SAVE The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
DC IN TOO
HIGH
Voltage of the power supply is too high (The supplied AC power adaptor is
not used).
, Use the supplied AC power adaptor.
DISC FULL Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
DOWNLOAD
READY
MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to “Software Operation” section.)
EJECT DISC OK The recorder has finished communicating with the computer and it is safe
to eject the disc from the recorder or disconnect the USB cable.
END The recorder reached to the end of the disc while playing or pressing >.
ERROR There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 78.
ERROR XX There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 78. If the message
appears again, please consult your nearest Sony dealer.
FOLDER NO
EXPAND
You tried to use the File List function to expand a folder that is already at
the 16th level.
, Files and folders can be expanded down to 16 levels. Expansion
beyond this level is not possible.
FORMAT
ERROR DISC
A disc with a format that the recorder does not support was inserted.
, Insert a disc used in Hi-MD mode.
A disc formatted on a computer was inserted.
, A disc formatted on a Windows or Macintosh computer cannot be
used. Format the disc on the recorder or with the SonicStage software.
Message Meaning/Remedy
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MZM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MZM100 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info