23360
44
Zoom out
Zoom in
Previous page
1/79
Next page
44
model name1[MZ-DH710] model name2[MZ------]
[2-593-570-11(1)]
masterpage:Left
filename[E:\SONY PA\5249_DH710\DATA
DH710\J9050107_2593570111DH710_GB\2593570111\01GB-MZDH710\040OPE.fm]
Messages
If the following messages flash in the display window, check the chart below.
Message Meaning/Remedy
AVLS NO
VOLUME
OPERATION
AVLS is set to “AVLS On” and so the volume cannot rise higher.
, Set AVLS to “AVLS Off” (page 27).
BLANKDISC A disc with no recording on it is inserted.
BUSY WAIT A
MOMENT
The player is accessing disc information.
You tried to operate the player while it was accessing the recorded data.
, Wait until the message goes out (in rare cases, it may take a few
minutes).
CANNOT PLAY You tried to play a track that is subject to play restrictions.
You tried to play an MP3 track with a format not supported by this player.
, This player only supports MP3 tracks (MPEG-1 Audio Layer-3/
sampling frequency 44.1 kHz) that have been transferred using the
SonicStage software.
CANNOT
RECORD OR
PLAY
There is no audio data that can be played on the player.
The audio data or disc management file has been damaged.
, Replace the disc or format the disc using the SonicStage software.
DATA SAVE The player is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
D-L READY MD Simple Burner is now ready to record an audio CD to the disc in the
player using Simple mode (see “Software Operation”).
EJECT DISC OK The player has finished communicating with the computer and it is safe
to eject the disc from the player or disconnect the dedicated USB cable.
END The player reached to the end of the disc while playing or pressing >.
ERROR There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 43.
ERROR XX There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 43. If the message
appears again, please consult your nearest Sony dealer.
FORMAT
ERROR DISC
A disc with a format that the player does not support was inserted.
, Insert a disc used in Hi-MD mode.
A disc formatted on the computer was inserted.
, When formatting a disc on the computer, make sure to use the
SonicStage software.
GROUP FULL You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a disc used in MD mode.
, You can create only up to 255 groups (on a disc used in Hi-MD
mode) or 99 groups (on a disc used in MD mode) on a disc. Keep the
group number within 255 or 99.
HOLD The player is locked.
, Slide HOLD against the arrow to unlock the player (page 13).
020REG.book Page 44 Wednesday, March 16, 2005 1:57 PM
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MZDH710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MZDH710 in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info