59923

Sony MV700HRB Manual

35
Zoom out
Zoom in
Previous page
1/244
Next page
35
Preparing for the initial
parental setting - Level
Playback of some DVDs can be limited
according to a predetermined level, such as the
age of the viewer. The Parental control
function allows you to set a playback
limitation level.
This setting is possible only when a password
is entered as described in “Setting the
password - Password” (page 34).
1 Press (SETUP), then press < or ,
button repeatedly until “Parental Setup
Page” appears on the screen.
2 Press (ENTER).
3 Press M or m button repeatedly to select
“Level”, then press (ENTER).
4 Press M or m button repeatedly to select
the limitation level, then press (ENTER).
5 Press (SETUP) to exit the Setup menu.
Refer to the following table. Parental levels of
the table are on the MPAA (Motion Picture
Association of America) rating system. If you
set this player to level “4” for example, DVDs
with levels “5”, “6”, ‘7", and “8” cannot be
played.
This Player MPAA Rating System
“1” “G”: General audience
“2” –
“3” “PG”: Parental guidance
suggested
“4” “PG13”: Parents strongly
cautioned
“5” –
“6” “R”: Restricted
“7” “NC17”: No one 17 and under
admitted
“8” No restriction
Monitoring video signals
input from the connected
device
Switch the input channel to monitor video
signals input from the device connected to the
A/V INPUT connector of the player.
1 Press (POWER) to turn on the player.
The current input channel (DVD) appears
on the screen for 5 seconds.
2 Press (SOURCE) on the card remote
commander repeatedly to select
“VIDEO.”
Each time you press the button, “DVD”,
“MS” and “VIDEO” alternate.
Be sure to change the input channel setting
to “DVD” to play the DVD with this player.
Selecting the color system
for the input video signal
The player detects the color system of the
input video signal (PAL or NTSC) and changes
the setting automatically (auto mode).
Follow the steps below to change the color
system setting for the input video signal
manually.
1 Press (POWER) to turn on the player.
The current input channel (DVD) appears
on the screen for 5 seconds.
2 Press (VOLUME) +/– on the monitor
repeatedly to select “PAL” or “NTSC.”
Note
When changed manually, the color system setting
for the input video signal does not return to auto
mode until the player is turned off or input
channel setting is changed. Therefore, when it is
set to “PAL,” the DVD recorded in NTSC system
cannot be viewed on the monitor of the player
unless you turn off the player, then turn it on
again.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MV700HRB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MV700HRB in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info