159185
30
Zoom out
Zoom in
Previous page
1/44
Next page
30
GB
The album name, track title and ID3 tag
information do not appear correctly.
Use a disc that conforms with ISO9660 Level 1,
Level 2 or Joliet in the expansion format.
The disc ID3 tag is not ver. 1 nor ver. 2.
Only up to 30 characters of ID3 tags are displayed.
The characters that can be displayed by this
system are as follows:
– Upper cases (A to Z)
– Numbers (0 to 9)
– Symbols (’< > * + , – / @ [ \ ] _)
Other characters may not be displayed correctly.
Tuner
Severe hum or noise/stations cannot be
received. (“TUNED” or “STEREO” flashes in
the display.)
Set the proper band and frequency (page 14).
Connect the antenna properly (page 7).
Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.
The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
Locate the antennas as far away from the speaker
cords as possible.
Try turning off surrounding electrical equipment.
Set “CD POWER OFF” by CD power manage
function (page 15).
A stereo FM program cannot be received in
stereo.
Press FM MODE repeatedly until “STEREO”
appears.
Tape deck
The tape does not record or play, or there is a
decrease in sound level.
The heads are dirty. Clean them (page 33).
The record/playback heads are magnetized.
Demagnetize them (page 33).
The tape does not erase completely.
The record/playback heads are magnetized.
Demagnetize them (page 33).
There is excessive wow or flutter, or the sound
drops out.
The capstans or pinch rollers are dirty. Clean them
(page 33).
Noise increases or the high frequencies are
erased.
The record/playback heads are magnetized.
Demagnetize them (page 33).
The tape does not record.
No cassette is loaded. Load a cassette.
The tab has been removed from the cassette.
Cover the broken tab with adhesive tape
(page 33).
The tape has wound to the end.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
Use buttons on the unit for the operation.
1 Disconnect the power cord.
2 Reconnect the power cord.
3 Press ?/1 to turn on the system.
4 Press x, ILLUMINATION and DISC 1 at the
same time.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.
Note
You cannot reset the system to the factory settings in
Power Saving Mode (page 24).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mhc rg 470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mhc rg 470 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mhc rg 470

Sony mhc rg 470 User Manual - German, Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info