Manual Sony mhc rg 444 (page 31 of 48) (English)

159068

Zoom out

Zoom in

1/48

Optional Components

2 Connect the transmitter to a wall outlet

using the supplied AC power adaptor.

The transmitter automatically turns on.

Notes

• When you connect the transmitter to the analog out

jacks, do not set the NOISE FILTER to ON.

Otherwise, the volume will be limited.

• The NOISE FILTER effects the sound only when

you connect an optional component to the AUDIO

IN A jacks of the transmitter. Connecting to the

AUDIO IN B jack, the switch has no effect.

• If stereo mini jack is connected to LINE OUT and the

NOISE FILTER is set to ON, audio output will be

reduced and audio signal may be intermittent or auto

muting will activate. In this case, set the NOISE

FILTER to OFF.

• When the transmitter is placed on or near a TV, it

may pick up a noise. In such case, place the

transmitter away from the TV.

• Do not place the transmitter near a fluorescent lamp,

etc. when using the system.

• Use only the supplied AC power adaptor. Do not use

any other AC power adaptor.

• If the connected component has the AVLS

(Automatic Volume Limiter System) function, be

sure to turn off the function when using the

transmitter. Otherwise, you will have to turn up the

volume of the speaker, and that may cause distortion.

• If the connected component has the BASS BOOST

or MEGA BASS function, be sure to turn off the

function when using the transmitter. Otherwise, the

sound from the speaker may be distorted.

The effective areas of the

transmitter

Wireless system that allows you to use your

system free from the restriction of speaker cords.

The optimum signal reception range is up to

approximately 30.5 m (100 feet) without the

system picking up some interference. However,

the distance may be reduced according to the

surroundings and environment. If the system

picks up some noise while using it within the

above mentioned distance, reduce the distance

between the transmitter unit and the main unit,

or select another channel.

Notes

• When you use the main unit inside the effective areas

of the transmitter, the transmitter can be placed in

any direction from the listener.

• Even within the signal reception area, there are some

spots (dead spot) where the RF signal cannot be

received. This is a characteristic inherent to RF

signals, and does not indicate a malfunction. By

slightly moving the transmitter, the location of the

dead spot can be changed.

Notes on receiving performance

This system component utilizes very high frequency

signals in the 900 MHz band so the receiving

performance may deteriorate due to the surroundings.

The following examples illustrate conditions that may

reduce the possible receiving range or cause

interference with reception.

– Radio waves generated such as cellphones and

cordless phone systems or metal instruments are

placed on the unit.

– Inside a building with walls containing steel beams.

– Area with many steel file cabinets, etc.

– Area with many electrical appliances capable of

generating electromagnetic noise.

– Transmitter is placed on a metal instrument.

– Area facing roadways.

– Noise or interfering signals exist in the surroundings

due to radio transceivers in trucks, etc.

– Noise or interfering signals exist in the surroundings

due to wireless communication systems installed

along roadways.

– Transmitter is placed directly on floor.

Placing it up off the floor, such as on a desk, is

recommended.

AC power adaptor

(supplied: AC-GSX100)

to wall outlet

to DC IN 9V jack

Transmitter

Polarity of the plug

continued

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony mhc rg 444 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mhc rg 444

Sony mhc rg 444 User Manual - German, Dutch, Italian - 144 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony mhc rg 444 Manual

Product: