554965
36
Zoom out
Zoom in
Previous page
1/48
Next page
masterpage:Left
F
rame\MHC-GN880\MHC-GN880 GB\GB11TRB-E3.fm]
36
GB
model name [MHC-GN880/GN770/GX9000/GN660]
[4-252-939-12(1)] GB
Should you encounter a problem with your
system, do the following:
1 Make sure the power cord and speaker
cords are connected correctly and firmly.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
General
The display starts flashing as soon as you
plug in the power cord even though you have
not turned on the system (see step 6 of
“Hooking up the system” (page 8)).
Press DISPLAY twice while the system is off.
The demonstration disappears.
“– –:– –” appears in the display.
A power failure occurred. Set the clock (page 11)
and timer settings (pages 27 and 28) again.
The clock setting/radio presetting/timer is
canceled.
Redo the following:
– “Setting the clock” (page 11)
– “Presetting radio stations” (page 16)
– “Falling asleep to music” and “Waking up to
music” (page 27)
– “Timer recording radio programs” (page 28)
There is no sound.
Turn VOLUME clockwise (or press
VOLUME + on the remote).
Make sure the headphones are not connected to
the PHONES jack.
Check the speaker connections (page 9).
There is no audio output during Timer Recording.
There is no microphone sound.
Turn VOLUME (or press VOLUME +/
repeatedly on the remote) or MIC LEVEL to
adjust the microphone volume.
Make sure the microphone is connected to the
MIC jack correctly.
There is severe hum or noise.
Move the system away from the source of noise.
Connect the system to a different wall outlet.
Install a noise filter (commercially available) to
the power cord.
The timer cannot be set.
Set the clock again (page 11).
The timer does not function.
Check the timer setting and set the correct time
(pages 27 and 28).
Cancel the Sleep Timer function (page 27).
You cannot select the Play Timer and Timer
Recording simultaneously.
Troubleshooting
Problems and remedies
When the ?/1 indicator flashes
Immediately unplug the power cord and
check the following items.
Are the system control cables connected
correctly?
Are the + and – speaker cords short
circuited?
Is the voltage selector set to the correct
voltage?
Check the voltage for your region, then
make sure the voltage selector is set
correctly.
Are you using the supplied speakers?
Is anything blocking the ventilation holes
on the rear of the system?
After checking the above items and fixing
any problems, plug in the power cord again
and turn on the system. If the ?/1
indicator
still flashes, or if the cause of the problem
cannot be found even after checking all the
above items, consult your nearest Sony
dealer.
36


Need help? Post your question in this forum.

Forumrules
1

Forum

sony-mhc-gn770

Reset search

  • My dvd does not open .. I try to
    Press eject button but it does not work fix the problem please Submitted on 24-2-2017 at 16:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MHC-GN770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MHC-GN770 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info