142608
40
Zoom out
Zoom in
Previous page
1/133
Next page
40
Picture flickers, bounces,
oscillates, or is scrambled.
Adjust the pitch and phase (PC 2 only) (page 24).
xProblem caused by a computer or other equipment connected, and not
caused by the display
Check your graphics board manual for the proper display setting.
Confirm that the graphics mode (VESA, Macintosh 19'' Color, etc.) and the frequency of
the input signal are supported by this display. Even if the frequency is within the proper
range, some graphics boards may have a sync pulse that is too narrow for the display to
sync with correctly.
This display does not process interlace signals. Set for progressive signals.
Adjust the computers refresh rate (vertical frequency) to obtain the best possible picture
(60 Hz is recommended).
Picture is fuzzy. Adjust the contrast and brightness (page 19).
Adjusting the sharpness (page 19).
Adjust the pitch and phase (PC 2 only) (page 24).
xProblem caused by a computer or other equipment connected, and not
caused by the display
Set the resolution to 1,680 × 1,050 on your computer.
Picture is ghosting. Eliminate the use of video cable extensions and/or video switch boxes.
Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly (PC 2 only).
Adjust the pitch and phase (page 24).
Adjust the picture position (page 25). Note that some video modes do not fill the screen to
the edges.
Picture becomes vertically
stretched, or picture size looks
strange.
xProblem caused by a computer or other equipment connected, and not
caused by the display
Set the resolution to 1,680 × 1,050 on your computer.
Picture is too small. xProblem caused by a computer or other equipment connected, and not
caused by the display
Set the resolution to 1,680 × 1,050 on your computer.
Picture is dark. Adjust the backlight (page 19).
Adjust the brightness (page 19).
Adjust the gamma on the “Gamma” menu (page 20).
It takes a few minutes for the display to become bright after turning on the display.
When the Picture Mode is set to “Auto,” the display brightness may become darker in low
ambient light (pages 18, 36).
Wavy or elliptical pattern (moire)
is visible.
Adjust the pitch and phase (PC 2 only) (page 24).
Color is not uniform. Adjust the pitch and phase (PC 2 only) (page 24).
White does not look white. Adjust the color temperature (page 20).
Display buttons do not operate
( appears on the screen).
If “Menu Lock” is set to “On,” set it to “Off” (page 34).
Resolution displayed on the menu
screen is incorrect.
Depending on the graphics board setting, the resolution displayed on the menu screen may
not coincide with the one set on the computer.
Symptom Check these items
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mfm ht205s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mfm ht205s in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info