Manual Sony MEX-N6002BD (page 20 of 184) (English, German, Dutch, French, Italian)

752848

Zoom out

Zoom in

1/184

BALANCE

Adjusts the sound balance: [RIGHT-15] –

[CENTER] – [LEFT-15].

FADER

Adjusts the relative level: [FRONT-15] – [CENTER]

– [REAR-15].

DSEE

(digital sound enhancement engine)

Improves digitally compressed sound by

restoring high frequencies lost in the

compression process: [ON], [OFF].

This setting can be memorized for each source

other than the tuner.

AAV

(advanced auto volume)

Adjusts the playback volume level of all

playback sources to the optimum level: [ON],

[OFF].

RB ENH

(rear bass enhancer)

Enhances the bass sound by applying a low pass

filter setting to the rear speakers. This function

allows the rear speakers to work as a subwoofer

if one is not connected.

(Available only when [SW DIREC] is set to [OFF].)

RBE MODE

(rear bass enhancer mode)

Selects the rear bass enhancer mode: [1], [2], [3],

[OFF].

LPF FREQ

(low pass filter frequency)

Selects the subwoofer cut-off frequency: [50Hz],

[60Hz], [80Hz], [100Hz], [120Hz].

LPF SLOP

(low pass filter slope)

Selects the LPF slope: [1], [2], [3].

SW DIREC

(subwoofer direct connection)

Adjusts the settings for the subwoofer

connected to the rear speaker lead without a

power amplifier.

(Available only when [RBE MODE] is set to [OFF].)

Be sure to connect a 4  – 8  subwoofer to

either of the rear speaker leads. Do not connect

a speaker to the other rear speaker lead.

SW MODE

(subwoofer mode)

Selects the subwoofer mode: [1], [2], [3], [OFF].

SW PHASE

(subwoofer phase)

Selects the subwoofer phase: [NORM], [REV].

SW POS

(subwoofer position)

Selects the subwoofer position: [NEAR],

[NORMAL], [FAR].

(Available only when [F/R POS] is set to other

than [OFF].)

LPF FREQ

(low pass filter frequency)

Selects the subwoofer cut-off frequency: [50Hz],

[60Hz], [80Hz], [100Hz], [120Hz].

LPF SLOP

(low pass filter slope)

Selects the LPF slope: [1], [2], [3].

S.WOOFER

(subwoofer)

SW LEVEL

(subwoofer level)

Adjusts the subwoofer volume level:

[+10 dB] – [0 dB] – [-10 dB].

([ATT] is displayed at the lowest setting.)

SW PHASE

(subwoofer phase)

Selects the subwoofer phase: [NORM], [REV].

SW POS

(subwoofer position)

Selects the subwoofer position: [NEAR],

[NORMAL], [FAR].

(Available only when [F/R POS] is not set to

[OFF].)

LPF FREQ

(low pass filter frequency)

Selects the subwoofer cut-off frequency: [50Hz],

[60Hz], [80Hz], [100Hz], [120Hz].

LPF SLOP

(low pass filter slope)

Selects the LPF slope: [1], [2], [3].

HPF

(high pass filter)

HPF FREQ

(high pass filter frequency)

Selects the front/rear speaker cut-off frequency:

[OFF], [50Hz], [60Hz], [80Hz], [100Hz], [120Hz].

HPF SLOP

(high pass filter slope)

Selects the HPF slope (effective only when [HPF

FREQ] is set to other than [OFF]): [1], [2], [3].

AUX VOL

(AUX volume level)

Adjusts the volume level for each connected

auxiliary device: [+18 dB] – [0 dB] – [-8 dB].

This setting negates the need to adjust the

volume level between sources.

(Available only when the AUX is selected.)

BTA VOL

(BLUETOOTH audio volume level)

Adjusts the volume level for each connected

BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB].

This setting negates the need to adjust the

volume level between sources.

(Available only when the BT audio or application

is selected.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony MEX-N6002BD in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 11,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony MEX-N6002BD Manual

Product: