23346
54
Zoom out
Zoom in
Previous page
1/60
Next page
54
masterpage:Leftfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Display messages
Additional Information
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
Display messages
The following table explains the various messages that
appear in the display. Messages are also displayed by the
deck’s Self-diagnosis function (see page 53).
Message Meaning
Auto Cut The Auto Cut Function is on (page 18).
Blank Disc
A new (blank) or erased MD has been
inserted.
Cannot Copy
An attempt was made to make a second
copy from a digitally dubbed MD
(page 52).
Cannot Edit
An attempt was made to edit a
premastered MD, to edit the MD
during Program or Shuffle Play or to
change the recording level of an MD
recorded in LP2 or LP4 Stereo mode.
Disc Full The MD is full (page 51).
Impossible
The deck cannot do the specified
operation (pages 14, 32 and 34).
Incomplete!(!)
The S.F Edit (changing the recording
level after recording, Fade-in, Fade-
out) operation was not performed
properly because the deck was moved
while recording was in progress or the
MD is damaged or dirty.
Initialize (flashing)
The Setup Menu settings have been
lost.
Or the contents recorded by the timer
have disappeared over time and are not
be available for saving to disc, or
Program Play could not be activated
since the program has disappeared over
time.
(The message flashes for about four
seconds when you turn on the deck by
pressing
?/1
.)
Name Full!(!)
The naming capacity of the MD has
reached its limit (about 1,700
characters).
No Change
While attempting to change the
recording level after recording, you
pressed MENU/NO without actually
changing the recording level, so no
change was made.
No Disc There is no MD in the deck.
No Name The track or disc has no name.
No Program!(!)
You tried to start Program Play when
no program exists.
Premastered
An attempt was made to record to a
premastered MD.
ProgramFull(!)
The program contains the maximum
number of tracks. You cannot add any
more tracks.
REMOTE
The MD is being controlled by an
external device connected to the deck.
1)
S.F Edit!
You attempted to perform another
operation while in S.F Edit (changing
the recording level after recording,
Fade-in, Fade-out) mode.
You cannot perform any other
operations while in S.F Edit mode.
(S.F) Edit NOW
You pressed
?/1
while in S.F Edit
(changing the recording level after
recording, Fade-in, Fade-out) mode.
If you turn off the deck while in S.F
Edit mode, any changes that you have
made will not be made properly. Finish
the changes and leave S.F Edit mode
before turning off the deck. If you
accidentally turn off the deck while
changes are being made, press
?/1
while the message is displayed.
Smart Space
The Smart Space Function is on
(page 18).
TOC Reading
The deck is checking the TOC (Table
Of Contents) on the MD.
1) If “REMOTE” appears under other circumstances, turn off
the deck, then turn it on again.
Message Meaning
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MDSJE640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MDSJE640 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info