40278
48
Zoom out
Zoom in
Previous page
1/52
Next page
48
Display Messages
The following table explains the various messages
that appear in the display. Messages are also
displayed by the deck’s Self-Diagnosis function
(see page 49).
Message Meaning
Auto Cut The Auto Cut function is on
(page 17).
Blank Disc A new (blank) or erased MD
has been inserted.
Cannot Copy An attempt was made to make
a second copy from a digitally
dubbed MD (page 11).
Cannot Edit An attempt was made to edit
the MD during Program or
Shuffle Play, or to edit an MD
recorded in LP2 or LP4 stereo
recording mode. Or the MD
is record-protected.
Disc Full The MD is full (page 44).
Impossible The deck cannot do the
specified operation.
Incomplete!! Fade-in or Fade-out recording
or playback was not
successfully done due to
vibrations applied to the deck
or scratches or dirt on the
disc.
Initialize (flashing) The Setup Menu settings have
been lost, the material on the
MD was not properly
recorded, or the status of the
deck before the power was
last turned off was not
memorized. (This message
flashes in the display for
about four seconds when you
turn off the deck by pressing
?/1.)
Name Full The naming capacity of the
MD has reached its limit
(about 1,700 characters).
No Change You performed S.F. Edit
without specifying the
recording level, resulting in
no change of recording level.
No Disc There is no MD in the deck.
No Name The track or disc has no name.
No Program!! You tried to start Program
Play when no program exists.
Premastered An attempt was made to
record on a premastered MD.
ProgramFull! The program contains the
maximum number of tracks.
You cannot add any more
tracks.
REMOTE The MD deck is being
controlled by an external
device connected to the
deck.*
S.F Edit! You tried to do another
operation while the S.F Edit is
in progess. You cannot
perform any other operations
at this time.
S.F Edit NOW You pressed +/1 while in S.F
Edit (changing the recording
level after recording, Fade-in,
or Fade-out) mode. If you
turn off the deck while in S.F
Edit mode, any changes that
you have made will not saved
properly. Finish the editing
and exit S.F Edit mode before
turning off the deck. If you
wish to turn off the deck at
this time, press +/1 again
while this indication appears
in the display.
Smart Space The Smart Space function is
on (page 17).
Text Protect The CD-TEXT information
being recorded is protected
and can’t be copied.
TOC Reading The deck is checking the TOC
(Table Of Contents) on the
MD.
* If “REMOTE” appears under other circumstances,
turn off the deck, then turn it on again.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MDS-PC3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MDS-PC3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony MDS-PC3

Sony MDS-PC3 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info