40278

Sony MDS-PC3 Manual

15
Zoom out
Zoom in
Previous page
1/52
Next page
15
Recording on MDs
Recording for Long
Times
In addition to normal stereo recording, this deck
has two recording modes: LP2 and LP4. When
recording in LP2 mode, you can record 2 times the
normal recordable time, and in LP4 mode, you can
record 4 times the normal recordable time. In
addition, the recordable time for monaural
recording is approximately double the stereo
recording time.
Note
MDs recorded in LP2 or LP4 mode can be played
back only on decks that support the MD LP format.
Conventional MD decks cannot play MDs recorded in
LP2 or LP4 mode.
?/1
Z
N
Xx
.> z
mM
–
+
g
REC MODE
1 Do steps 1 to 3 of “Recording on an
MD” on page 12.
2 Press REC MODE repeatedly to select
the recording mode.
To record in Select to light up
Stereo (factory setting) no indicator
LP2 stereo LP2
LP4 stereo LP4
Monaural Mono
3 Do steps 5 to 9 of “Recording on an
MD” on page 13.
6 To start recording, continue from step 8
of “Recording on an MD” on page 13.
z
You can adjust the recording
level during recording or recording
pause
Press LEVEL +/– repeatedly.
z
To display the level of the
strongest signal
The Peak Hold function continuously displays the
level of the strongest signal that has been input.
Do the procedure below to turn Peak Hold on.
1 While the deck is stopped, press MENU/NO twice
to display “Setup Menu.”
2 Press ./> repeatedly (or turn ./> on
the deck) until “P.Hold” appears, then press YES
(or ./> on the deck).
3 Press ./> (or turn ./> on the deck)
to select “P.Hold On,” then press YES (or ./
> on the deck).
4 Press MENU/NO.
To turn Peak Hold off, selecte “P.Hold Off” in step 3
above.
z
You can also change the input
level of the ANALOG IN jacks or
DIGITAL IN connector by accessing
the “Setup Menu”
1 While the deck is stopped, press MENU/NO twice
to display “Setup Menu.”
2 Press ./> repeatedly (or turn ./> on
the deck) until “Ain” (for the analog input) or “Opt”
(for the digital input) appears, then press YES (or
./> on the deck).
3 Press ./> repeatedly (or turn ./> on
the deck) to change the input level, then press YES
(or ./> on the deck).
4 Press MENU/NO.
Note
The maximum recording level is + 18.0 dB for digital
recordings, and +12.0 dB for analog recordings. The
maximum recording level may still be inadequate for
producing a proper recording if the output level of the
source component is extremely low.
continued
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MDS-PC3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MDS-PC3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony MDS-PC3

Sony MDS-PC3 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info