157185

Sony mds-je780 Manual

42
Zoom out
Zoom in
Previous page
1/56
Next page
42
GB
By connecting a timer (not supplied) to the
deck, you can start and stop playing/recording
operations at specified times. For further
information on connecting the timer or setting
the starting and ending times, refer to the
instructions that came with the timer.
Playing an MD using a timer
1 Do steps 1 to 3 of “Playing an MD” on
page 20.
2 Press PLAY MODE repeatedly to select
the play mode you want.
To play only specific tracks, create a
programme (see “Creating your own
programme” on page 24).
To specify the time for the end of playing,
press H to start playing, then go to step 3.
3 Set TIMER on the deck to PLAY.
4 Set the timer as required.
5 After you have finished using the timer,
set TIMER on the deck to OFF.
Recording to an MD using a
timer
1 Do steps 1 to 6 of “Recording to an MD”
on page 10.
2 Press x.
If you want to specify the time for the end of
recording, do step 7 of “Recording to an
MD” on page 10.
3 Set TIMER on the deck to REC.
4 Set the timer as required.
5 After you have finished using the timer,
set TIMER on the deck to OFF. Then
change the deck to standby mode by
plugging the mains lead of the deck into
mains or set the timer to continuous
operation.
If TIMER is left at REC, the deck will
automatically start recording the next time
you turn on the deck.
Make sure to change the deck to
standby mode within a week after
timer recording is completed.
The TOC on the MD is updated and recorded
contents are written to the MD when you turn
on the deck. If the recorded contents have
disappeared, “Initialize” flashes when you turn
on the deck.
Notes
• It may take about 30 seconds after the deck is turned
on until recording starts. When recording at a
specified time using the timer, be sure to take this
time into account when setting the recording start
time.
• Contents recorded by timer recording are recorded
to the MD the next time you turn on the deck. At this
time, “TOC” flashes. Do not unplug the mains lead
or move the MD deck while “TOC” is flashing in
order to ensure the correct recording.
• When the remaining time on the MD runs out during
timer recording, the recording stops at that point and
the MD deck switches to stop mode.
• During timer recording, new material is recorded
from the end of the recorded portion on the MD.
However, when timer recording is set with the
Group function on but no group is specified, the
material is recorded into a new group.
Using a timer
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mds-je780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mds-je780 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mds-je780

Sony mds-je780 User Manual - German, Dutch - 168 pages

Sony mds-je780 User Manual - French - 56 pages

Sony mds-je780 User Manual - Italian, Polish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info