157185
17
Zoom out
Zoom in
Previous page
1/56
Next page
Recording to MDs
17
GB
Monitoring the input signal
(Input Monitor)
You can monitor the selected input signal even
when you are not recording it.
1 Press EJECT A to eject the MD.
2 Press INPUT repeatedly to select the
jacks (connector) where the signal you
want to monitor is being input.
3 Press REC z.
When an analogue input is selected
The analogue signal input from the
ANALOG IN jacks is output to the
DIGITAL OUT connector after A/D
conversion, and then to the ANALOG OUT
jacks and PHONES jack after D/A
conversion. “AD – DA” appears in the
display during this time.
When a digital input is selected
The digital signal input from the DIGITAL
IN connector is output to the DIGITAL OUT
connector after passing through the
sampling rate converter, and then to the
ANALOG OUT jacks and PHONES jack
after D/A conversion. “ DA” appears in the
display during this time.
To stop Input Monitor
Press x.
When recording from an FM or satellite
broadcast, the first few seconds of material are
often lost due to the time it takes you to
ascertain the contents and press the record
button. To prevent the loss of this material, the
Time Machine Recording feature constantly
stores the most recent audio data in a buffer
memory. This lets you record the sound from
6 seconds before starting recording, as shown in
the illustration below:
1 Do steps 1 to 5 of “Recording to an MD”
on page 10.
The deck changes to recording pause.
2 Start playing the programme source.
3 Press AMS (or T.REC) at the point
where you want to start recording.
Recording starts with the six seconds of
prestored data in the buffer memory, then
continues recording via the buffer memory
thereafter.
Note
In step 3 above, recording starts using the audio data
accumulated in the buffer memory. Therefore, when
the recording pause mode or sound source playback
has lasted for less than 6 seconds, less than 6 seconds
of audio data are stored in the buffer memory, so the
sound from 6 seconds before cannot be recorded.
Starting recording with
6 seconds of prestored
audio data
— Time Machine Recording
When you press AMS
in step 3
End of the source
to be recorded
Time
6 seconds
Recorded
portion
Beginning of the source to
be recorded
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mds-je780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mds-je780 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mds-je780

Sony mds-je780 User Manual - German, Dutch - 168 pages

Sony mds-je780 User Manual - French - 56 pages

Sony mds-je780 User Manual - Italian, Polish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info