157184
15
Zoom out
Zoom in
Previous page
1/108
Next page
Recording to MDs
15
GB
4 Turn AMS (or press ./>
repeatedly) to select the setting, then
press AMS or YES.
5 Press MENU/NO.
Notes
Smart Space does not affect the order of the track
numbers being recorded, even if the blank space
occurs in the middle of a track.
Auto Cut is automatically turned on or off in tandem
with Smart Space.
If the deck continues recording pause for about
10 minutes after the Auto Cut activated, recording
stops automatically.
Adjusting the recording level
You can adjust the recording level for both
analogue and digital recordings.
1 Do steps 1 to 5 of “Recording to an MD”
on page 9.
2 Play the portion of the programme
source with the strongest output.
3 Press DISPLAY/CHAR (or DISPLAY)
repeatedly until the level of the input
signal appears.
4 While monitoring the sound, turn REC
LEVEL (or press LEVEL +/– repeatedly)
to raise the recording level to its
highest level without turning on the two
rightmost indicators on the peak level
meters.
5 Stop playing the programme source.
6 To start recording, continue from step 7
of “Recording to an MD” on page 9.
Tips
You can adjust the recording level without changing
the display. In this case, skip step 3 above. While
adjusting the recording level, the level of the input
signal appears for about three seconds.
You can adjust the recording level by pressing
LEVEL +/– on the remote repeatedly during
recording or recording pause.
Peak hold function freezes the peak level meters at
the highest level reached by the input signal.
1 While the deck is stopped, press MENU/
NO.
2 Turn AMS (or press ./> repeatedly)
until “Setup?” appears, then press AMS or
YES.
3 Turn AMS (or press ./> repeatedly)
until “P.Hold Off” (factory setting) appears,
then press AMS or YES.
4 Turn AMS (or press ./> repeatedly)
to select “P.Hold On”, then press AMS or
YES.
5 Press MENU/NO.
To turn off the Peak Hold Function, selectP.Hold
Off” in step 4 above.
Note
The recording level can only be increased up to
+12.0 dB (for analogue recording) or +18.0 dB (for
digital recording) (0.0 dB is the factory setting).
Therefore, if the output level of the connected
component is low, it may not be possible to set the
recording level to maximum.
To Select
Turn on Smart Space
and Auto Cut
S.Space On (factory
setting)
Turn off Smart Space
and Auto Cut
S.Space Off
Avoid turning on these indicators
continued
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mds-jb980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mds-jb980 in the language / languages: English, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mds-jb980

Sony mds-jb980 User Manual - German, Dutch, French, Italian, Polish, Swedish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info