499137
24
Zoom out
Zoom in
Previous page
1/108
Next page
24 (GB)
SIZE H
Adjusts the horizontal size of picture input from the
INPUT A/B (analog signal only) connector.
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size
of the picture. Adjust the setting according to the dots
of the input signal.
For details on the suitable value for the preset signals, see
page 25 (GB).
SHIFT
Adjusts the position of the picture input from the
INPUT A/B (analog signal only) connectors or
VIDEO IN jacks.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to
the right, and as the setting decreases, the picture
moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the < or , key to adjust the horizontal position
and the M or m key for the vertical position.
Note
If you adjust DIGIT KEYSTONE (page 27) and
SHIFT for the UXGA input signal, the picture may
not be displayed correctly.
ASPECT
Sets the aspect ratio of the picture.
When inputting 16:9 (squeezed) signal from
equipment such as a DVD player, set to 16:9.
4:3 : When the picture with ratio 4:3 is input.
16:9 : When the picture with ratio 16:9 (squeezed) is
input.
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
ON: Displays the picture according to the screen
size. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
The INPUT SETTING Menu
.........................................................................................................................................................................................................
1) The RGB signals of a computer. INPUT C is adjustable for the same items as that of the RGB (digital) signals.
Note
This item is displayed only when the computer signal
(except for the XGA, SXGA and UXGA signals) is
input.
Input signals and adjustable/setting items
Item Input signal
Video or Video GBR RGB
1)
S video (Y/C)
Component
DOT
PHASE
(HDTV only) (HDTV only) (Analog
only)
SIZE H
(HDTV only) (HDTV only) (Analog
only)
SHIFT
(Analog
only)
ASPECT
(480/60i,575/ (480/60i,575/
50i,480/60p, 50i,480/60p,
575/50p)
575/50p)
SCAN ––
CONV
(lower
than
SVGA
only)
: Adjustable/can be set
– : Not adjustable/can not be set
About the preset memory No.
This projector has 44 kinds of preset data for input
signals (the preset memory). The memory number of
the current input signal and the signal type are
displayed when the preset signal is input. This
projector automatically detects the signal type. When
the signal is registered to the preset memory, a
suitable picture is displayed on the screen according
to the signal type. You can adjust the picture through
the INPUT SETTING menu.
This projector also has 20 kinds of user memories for
each INPUT-A/B (analog signal only). When an
unpreset signal is input for the first time, memory
number is displayed as 0. If the input signal is
adjusted in the INPUT SETTING menu, the setting
via INPUT-A/B (analog signal only) is stored. When
more than 20 user memories are registered for each
INPUT-A/B (analog signal only), the newest memory
is automatically stored over the oldest one.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony LCD Dtat Projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony LCD Dtat Projector in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony LCD Dtat Projector

Sony LCD Dtat Projector User Manual - German, Italian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info