142606

Sony kp 41 px1 Manual

26
Zoom out
Zoom in
Previous page
1/224
Next page
27
GB
Additional Information when connecting equipment
Connecting a VCR
We recommend you connect your VCR to the D or E socket using a scart lead. If you do not have a scart lead, use the “Manually
Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”.
If your video supports Smartlink please refer the "Smartlink" section of this instruction manual.
Connecting to External Audio Equipment
1 To listen to the audio of your projection TV on the Hi-Fi equipment:
Plug in your Dolby Prologic system decoder amplifier to the B sockets on the rear of the projection TV if you wish to amplify
the audio output from the TV.
The output level from B sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound”
section of this instruction manual to adjust the volume of the headphones.
To enjoy “Dolby Virtual” sound effect through
your Hi-Fi equipment:
Place the speakers of your equipment in front of
your sitting place and besides the TV set but
keeping a distance of 50 cm from each speaker to
the TV set.
Then by using the menu system, select the menu “Sound
Control” and set “Dolby Virtual” to “On”.
2 To listen to the Dolby amplifier equipment on the projection TV speakers:
Plug in your Hi-Fi equipment to the A socket on the rear of the projection TV
if you wish to listen to the audio output from your Hi-Fi on the projection TV
speaker. If you have a Dolby amplifier, connect the centre output from your amplifier
to the A socket to use the projection TV as a centre speaker. Refer to the “Adjusting the Sound”
section of this instruction manual and set the option "Speaker" to "Centre in".
For mono equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 2 input signal using the instructions on
this page below.
Select and View the Input Signal
Optional Connections
Optional Connections
Using Optional Equipment
1 Connect your equipment to the designated projection TV socket, as it is indicated on the
previous page.
2 Switch on the connected equipment.
3 Press the button repeatedly on your remote control until the correct input symbol
appears on the screen.
Symbol Input signals
kk
kk
• Audio/video input signal through the Euro AV connector C
• RGB input signal through the Euro AV connector C
KK
KK
• Audio/Video input signal through the Euro AV connector D or the
phono sockets H and G.
qq
qq
2 • Audio/S Video input signal through the Euro AV connector D or the
sockets H and F.
……
……
3 • Audio/Video input signal through the Euro AV connector E.
4 To return to the normal TV picture, press the button on the remote control.
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Right Hi-Fi
Speaker
Left Hi-Fi
Speaker
Your sitting position
~50º
01GB.fm Page 27 Monday, June 4, 2001 3:47 PM
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony kp 41 px1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony kp 41 px1 in the language / languages: English, German, Dutch, French, Italian, Turkish as an attachment in your email.

The manual is 13,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info