57539
27
Zoom out
Zoom in
Previous page
1/36
Next page
Using MENU Functions
27
GB
“AV2 Output”: Sets a signal to be output through the socket labelled /
/ AV2 on the rear of the TV. If you connect a VCR/ DVD recorder or
other recording equipment to the / / AV2 socket, you can then
record from the equipment connected to other sockets of the TV.
“TV”: Outputs a broadcast.
“Auto”: Outputs whatever is being viewed on the screen (except signals
from the HDMI IN 1, HDMI IN 2, HDMI IN 3, / COMPONENT
IN and / PC IN sockets).
“Speaker”: Turns on/off the TV’s internal speakers.
“TV Speaker”: The TV speakers are turned on in order to listen to the TV’s
sound through the TV speakers.
“Audio System”: The TV speakers are turned off in order to listen to the
TV’s sound only through your external audio equipment connected to the
audio output sockets. When connected with “Control for HDMI” compatible
equipment, you can turn the connected equipment on interlocked with the TV.
This setting must be made after connecting the equipment.
“Audio Out”:
“Variable”: The audio output from your audio system can be controlled by
the TV’s remote.
“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s
volume control to adjust the volume (and other audio settings) through your
audio system.
z
“Audio Out” is not available for audio system connected to the TV using the HDMI
sockets.
HDMI Set-up
This is used to set the “Control for HDMI” compatible equipment connected to
the HDMI sockets. Note that the interlock setting must also be made on the
connected “Control for HDMI” compatible equipment side.
“Control for HDMI”: This sets whether to interlock the “Control for HDMI”
compatible equipment and the TV. When set to “On”, the following menu items
can be performed. However, power consumption in standby mode is higher than
usual.
“Auto Devices Off”: When this is set to “On”, the “Control for HDMI”
compatible equipment turn on and off interlocked with the TV.
“Auto TV On”: When this is set to “On” and if the connected HDMI, control
compatible equipment is turned on, the TV automatically turns on, and the
displays the HDMI input from the connected equipment.
“Device List Update”: Creates or updates the “HDMI Device List”. Up to 14
“Control for HDMI” compatible equipment can be connected, and up to 4
equipment can be connected to a single socket. Be sure to update the “HDMI
Device List” when you change the “Control for HDMI” compatible equipment
connections or settings. Select them manually one by one until getting a correct
picture for several seconds.
“HDMI Device List”: Displays the connected “Control for HDMI” compatible
equipments.
Product Information
Displays your TV’s product information.
All Reset
Resets all settings to the factory settings and then displays the “Auto Start-up”
screen.
z
Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any
buttons.
All settings, including Digital Favourite list, country/region, language, auto tuned
channels, etc. will be reset.
010COV.book Page 27 Tuesday, June 17, 2008 12:53 PM
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony KDL-26E4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony KDL-26E4030 in the language / languages: English as an attachment in your email.

The manual is 6,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony KDL-26E4030

Sony KDL-26E4030 User Manual - English - 71 pages

Sony KDL-26E4030 User Manual - German - 147 pages

Sony KDL-26E4030 User Manual - German - 147 pages

Sony KDL-26E4030 User Manual - Dutch - 147 pages

Sony KDL-26E4030 User Manual - Dutch - 147 pages

Sony KDL-26E4030 User Manual - French - 147 pages

Sony KDL-26E4030 User Manual - French - 147 pages

Sony KDL-26E4030 User Manual - Italian - 147 pages

Sony KDL-26E4030 User Manual - Italian - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info