141570
33
Zoom out
Zoom in
Previous page
1/196
Next page
33
GB
Additional Information
Replacing the lamp
The projection lamp, like all lamps, will eventually lose brightness and functionality which affects the overall
performance of your TV. How long the lamp maintains its brightness will vary depending upon your usage and
environmental conditions. To maintain the quality of your viewing experience, Sony recommends that you replace
the lamp (1) after approximately 8,000 hours of use, (2) when the screen becomes dark or the colour looks unusual,
(3) when the LAMP LED on the front of the TV lights on in red.
Tips
Only use the lamp XL-2400 for replacement. If you use another lamp, it may cause damage to the TV set.
Do not remove the lamp except when replacing it.
Before replacing the lamp, turn off the power and disconnect the power cord.
Replace the lamp only after it becomes cool. The front glass of the lamp remains at least 100 °C (212 °F) even
after the power has been turned off for 30 minutes.
Do not place the old lamp in proximity to children or flammable material.
Do not get the old lamp wet, or insert objects inside the lamp. It may cause the lamp to explode.
Do not place the old lamp near easily flammable objects, as this may cause fire. Also, do not put your hand inside
the lamp compartment, as you may be burned.
Attach the new lamp securely. If it is not securely attached, the picture may become dark.
Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment. If the glass become
dirty, the picture quality may deteriorate or the lamp life may shorten.
Attach the lamp cover firmly. If it is not firmly attached, the power will not turn on.
When the lamp burns out, a noise is audible. This does not indicate damage to the TV set.
Consult your nearest Sony service center to obtain a new lamp.
Always remember to dispose of used lamps in an evironmentally friendly way.
1 Turn off the power and disconnect the power cord.
If you start changing the lamp without disconnecting the power cord, the standby indicator on the TV set flashes.
Disconnect the power cord to continue changing the lamp.
2 Replace the lamp 30 minutes or more after the power is turned off to allow it to cool.
3 Take the new lamp out of the box.
Do not touch the glass portion of the new lamp.
Tips
Do not shake the lamp. Vibration can damage the lamp or shorten its life.
Avoid touching the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or
lamp life.
4 Remove the outside lamp cover
Continued
010COV.book Page 33 Monday, July 17, 2006 4:23 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony kdf 50 e 2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony kdf 50 e 2010 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 33,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony kdf 50 e 2010

Sony kdf 50 e 2010 User Manual - French, Italian, Spanish - 157 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info