693313
8
Zoom out
Zoom in
Previous page
1/284
Next page
D:\_SONY
TV\CHH2\SY19_CHH2_EU_RG_121\Final\4748430121\4748430121\4748430121_01GB\474843012
1_01GB.fm
master page: Left
KD-49XG83xx / 43XG83xx
4-748-430-12(1)
8
GB
CAM (Conditional Access Module)
Provides access to pay TV services. For
details, refer to the instruction manual
supplied with your CAM.
Do not insert the smart card directly into
the TV CAM slot. It must be fitted into the
Conditional Access Module provided by
your authorised dealer.
CAM is not supported in some countries/
areas. Check with your authorised dealer.
A CAM message may appear when you
switch to a digital programme after using
the Internet video.
USB 1/2, USB 3 (HDD REC)*
3
Connecting a large USB device may
interfere with other connected devices
beside it.
When connecting a large USB device,
connect to the USB 1 port.
Connect a USB HDD device to the USB 3
port (blue).
AUDIO OUT /
Supports 3-pole stereo mini jack only.
To listen to the TV’s sound through the
connected equipment, press HOME.
Select [Settings] t [Sound] t
[Headphone/Audio out] and then select
the desired item.
HDMI IN 1/2/3/4
HDMI interface can transfer the digital
video and audio on a single cable.
HDMI IN 2/3
To enjoy high quality 4K 50p/60p
contents, connect a Premium High Speed
HDMI cable to the HDMI IN 2/3 and set the
[HDMI signal format] to [Enhanced
format].
For details of supported formats, refer to
the “Specifications” in this manual (page
12-13).
HDMI IN 3 ARC (Audio Return Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your audio
system. An audio system that supports
HDMI ARC can send video to the TV, and
receive audio from the TV via the same
HDMI cable. If your audio system does not
support HDMI ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
IR BLASTER*
3
Use your Sony remote control to control
your External Box (cable/satellite box).
Connect the IR Blaster Cable*
3
to the IR
Blaster port on your TV. Place one or both
of the other two ends as shown below.
To perform IR Blaster setup, press HOME
and select [Settings] t [External inputs]
t [IR Blaster setup].
 (RF input), (Satellite input)
Connections for terrestrial/cable and
satellite. Connection steps: SUB. t MAIN
t Antenna
For SUB. jack, connect only when you are
using twin tuner mode except for Single
Cable Distribution EN50494.
*1 When connecting mono equipment, connect to the
L (MONO) audio jack (socket).
*2 For an external device which has only
SCART
AV OUT, use a SCART-RCA adaptor.
*3 Only on limited region/country/TV model.
<
<
12 mm
21 mm
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony KD-49XG8377 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony KD-49XG8377 in the language / languages: All languages as an attachment in your email.

The manual is 28,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info