If there is a tendency for underexposure when auto exposure is selected when using the imported base look, adjust the
look using [Paint/Look] > [Base Look] > [AE Level Offset] in the web menu.
Note
Just importing a 3D LUT file does not affect the image. Load the imported 3D LUT file using [Paint/Look] > [Base Look] > [Select]
in the camera menu.
If [Input] is not set correctly, the proper look will not be obtained.
The [Input], [Output], and [AE Level Offset] menu item settings are applied to the base look selected using [Select]. If multiple 3D
LUT files are imported, select each 3D LUT file using [Select], and configure [Input], [Output], and [AE Level Offset] individually
for each file.
The configured [Input], [Output], and [AE Level Offset] settings are saved for each 3D LUT file.
The base look/LUT selection options for imported 3D LUT files are common to [SDR(BT.709)], [HDR(HLG)], and Cine EI modes,
but color space and gamma conversion is not performed according to these modes.
3D LUT files are not deleted when [Maintenance] > [Reset] > [All Reset (except for Network Settings)] is executed in the web
menu.
5-041-957-11(1) Copyright 2022 Sony Corporation
