460610
43
Zoom out
Zoom in
Previous page
1/128
Next page
43
F:\CX94000\4-157-878-111(GB)\4157878111HXRNX5E_GB\01GB05BAS.fm
HXR-NX5E/NX5P/NX5M
4-157-878-11(1)
Recording/Playback
The longer the recording time, the poorer the
image quality.
The camcorder does not perform relay recording
with the memory cards during [SMOOTH
SLOW REC]. If the space on the memory card
is insufficient, the camcorder records movies
only as long as there is space available.
The time of the movie recorded using
[SMOOTH SLOW REC] is recorded after being
converted to slow-motion, not the time when the
movie is actually shot.
Progressive recording is not available for
[SMOOTH SLOW REC]. The progressive
setting is changed to the interlace setting
automatically.
[SMOOTH SLOW REC] is not available when
the recording format of high definition image
quality (HD) is set to 720/50p.
Even if you change the record mode with
[ REC MODE], the record mode of the
standard definition image quality (SD) does not
change.
The camcorder records movies
accompanied by time data, such as time
code and user bit.
Display the setting screen by pressing the
MENU button t select (TC/UB SET)
with the SEL/PUSH EXEC dial.
1 Select [TC PRESET] with the SEL/
PUSH EXEC dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/
PUSH EXEC dial.
You can set the time code between
00:00:00:00 and 23:59:59:24.
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/PUSH EXEC
dial.
To reset the time code
You can reset the time code (00:00:00:00).
Select [RESET] in step 2 of “Presetting
the time code.”
To reset the time code using the
Wireless Remote Commander
You can reset the time code (00:00:00:00)
also by pressing the TC RESET button on
the Wireless Remote Commander.
1 Select [UB PRESET] with the SEL/
PUSH EXEC dial.
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/
PUSH EXEC dial.
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/PUSH EXEC
dial.
To reset the user bit
You can reset the user bit (00 00 00 00).
Select [RESET] in step 2 of “Presetting
the user bit.”
You can synchronize the time code of this
camcorder with the time code of another
camcorder.
The camcorder that generates the time code
must be set to FREE RUN (the time code
advances regardlessly).
1 Set [TC RUN] and [TC MAKE] in
(TC/UB SET) as follows:
[TC MAKE]: [PRESET]
[TC RUN]: [FREE RUN]
2 Set the TC LINK switch of this
camcorder to IN, and connect the TC
LINK IN/OUT jack and the TC OUT
jack of the other camcorder with a
cable.
Setting time data
Presetting the time code
Presetting the user bit
Synchronizing the time code of this
camcorder with that of another
camcorder
Continued ,
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HXR-NX5M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HXR-NX5M in the language / languages: English as an attachment in your email.

The manual is 11,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info