62187
76
Zoom out
Zoom in
Previous page
1/151
Next page
76
HVR-V1E/V1P
2-887-521-12(1)
L:\SONY\PV\CX91030\1130insatuPDF\2887521121_GB\2887521111HVRV1UVIN\01GB06MEN
.fm
b Notes
This function is effective only when the AUTO/
MAN switches of both CH1 and CH2 are set to
MAN (p. 48).
When [LINKED] is set, you can adjust the
volume with the AUDIO LEVEL dial of CH1
(p. 48).
x INPUT1 LEVEL
You can switch between microphone and
line for input from the INPUT1 jack.
B MIC
Select to input audio signals from an
external microphone through the INPUT1
jack.
appears on the status check screen.
LINE
Select to input audio signals from an audio
device through the INPUT1 jack.
appears on the status check screen.
x INPUT1 TRIM
You can adjust levels of signal input from
the INPUT1 jack. This function is effective
only when [INPUT1 LEVEL] is set to
[MIC].
You can select from [0dB], [-8dB] and [-
16dB] (the default setting is [0dB]).
x INPUT1 WIND
This function is effective only when
[INPUT1 LEVEL] is set to [MIC].
B OFF
Select to disable wind noise reduction.
ON
Select to enable wind noise reduction.
appears on the status check screen.
x INPUT2 LEVEL
You can switch between microphone and
line for input from the INPUT2 jack.
B MIC
Select to input audio signals from an
external microphone through the INPUT2
jack.
appears on the status check screen.
LINE
Select to input audio signals from an audio
device through the INPUT2 jack.
appears on the status check screen.
x INPUT2 TRIM
You can adjust levels of signal input from
the INPUT2 jack. This function is effective
only when [INPUT2 LEVEL] is set to
[MIC].
You can select from [0dB], [-8dB] and [-
16dB] (the default setting is [0dB]).
x INPUT2 WIND
This function is effective only when
[INPUT2 LEVEL] is set to [MIC].
B OFF
Select to disable wind noise reduction.
ON
Select to enable wind noise reduction.
appears on the status check screen.
z Tips
The INPUT TRIM function adjusts the input
level from an external microphone. When using
a highly sensitive microphone or recording loud
sound, set this to the minus side. When using a
less sensitive microphone or recording quiet
sound, set it to the plus side.
When recording loud sound, the sound may be
distorted at either the input point or the
recording point. If it is distorted at the input
point, adjust the sound using the INPUT TRIM
function. If it is distorted at the recording point,
lower the total volume level manually.
If you set INPUT TRIM too far to the minus
side, the microphone volume becomes too low,
resulting in a poor signal to noise ratio.
Test the effect of the INPUT TRIM function
according to the microphone used or the sound
field of the recording site before actual
recording.
Press the MENU button t select the (AUDIO SET) by turning the SEL/PUSH EXEC
dial.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HVR-V1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HVR-V1 in the language / languages: English as an attachment in your email.

The manual is 6,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony HVR-V1

Sony HVR-V1 Quick start guide - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info