136405
10
Zoom out
Zoom in
Previous page
1/104
Next page
10 Chapter 1 Overview
Chapter 1 Overview
5 TIMER switch
Use to select Auto Repeat or recording using an
external AC timer (not supplied).
REPEAT: When the power is supplied to the unit,
the tape rewinds to its beginning automatically
and playback starts. When the following items on
the tape are searched, AUTO REPEAT playback
starts automatically.
–Index signals
– A portion unrecorded
– A portion recorded in the format set by other
than [AUTO] in [HDV/DV SEL] in [IN/OUT
REC] menu
– Tape end
Auto Repeat also functions if you set this switch to
REPEAT during playback or rewind.
For details on Auto Repeat, see “AUTO REPEAT
(CUSTOM REPEAT)” on page 39 and “CUSTOM
REPEAT” in “VTR SET” menu on page 74.
OFF: Auto Repeat or timer recording is released.
REC: Recording begins the moment the power is
connected to the unit.
Note
The setting of this switch still activates even when
KEY INH switch 2 is set to ON.
6 AUDIO OUTPUT SELECT switch
When the audio mode is 32 kHz (4-channel), use this
switch to select the audio channel to be output via
HDMI OUT jack, AUDIO jacks in OUTPUT as well
as PHONES jack 8.
CH-1/2: channels 1/2 only
MIX: channels 1/2 and channels 3/4
CH-3/4: channels 3/4 only
Notes
•During audio dubbing, if you want to listen to the
sound recorded on the tape, set this switch to CH-1/2;
if you want to listen to the sound being dubbed, set
the switch to CH-3/4. (Only channels 3 and 4 can be
used to dub.) To check the sound to be dubbed before
dubbing, set this switch to CH-3/4, then press
AUDIO DUB button while the unit is in the stop
mode. Then you can listen to the sound of the
channels used to dub (channels 3 and 4) at a moment.
For details on the audio dubbing, see page 60. Also refer
to the instructions of “AUDIO DUB / (A3) 1” button on
page 14.
•When the audio mode is 48 kHz (2-channel), sounds
of channel 1 and 2 are output via HDMI OUT jack,
AUDIO jacks in OUTPUT, and PHONES jack 8
regardless of the position of this switch.
•When this switch is set to MIX, the sound of the
mixed level of the pair of channel 1 and 3 and that of
channels 2 and 4 is output. The audio output level
becomes 50 % (–6 dB) of the original audio levels on
each channel.
7 PHONE LEVEL control knob
Controls the volume of the headphones connected to
PHONES jack 8.
8 PHONES jack
Connect stereo headphones for monitoring sounds
during recording or playback. The audio signals you
want to monitor can be selected with AUDIO
OUTPUT SELECT switch 6. By changing the setting
of [AUDIO MONI] in [AUDIO SET] (page 73), you
can monitor the sound of a particular channel.
9 INPUT SELECT switch
Switch the signal input jack from
HDV/DV jack, S
VIDEO jack, and VIDEO jack.
HDV/DV : Inputs a signal from
HDV/DV jack.
S VIDEO : Inputs a signal from S VIDEO jack.
VIDEO : Inputs a signal from VIDEO jack.
Notes
•Do not change the setting of this switch while
recording in progress, or it causes noise added to
images and sounds. Also, a part of the tape where the
change of setting applied will not be recorded
properly. The time code may be recorded
discontinuously.
If you change the setting of this switch while
recording in progress, the output signal via
HDV/
DV jack may be interrupted. Also, the unit may
detect signals such as a copyright information signal
incorrectly.
•When a signal is input via
HDV/DV jack, the
settings of the menu listed below are unavailable.
60i/50i SEL
AUDIO MODE
AUDIO LOCK
AUDIO INPUT LEVEL (–10/–2/+4) switch
AUDIO REC LEVEL control knob
AUDIO INPUT (AUTO/MANU) switch
Location and Function of Parts
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony hvr m25p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony hvr m25p in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info