465693
23
Zoom out
Zoom in
Previous page
1/44
Next page
23
GB
HT-SL55 4-247-583-12(1) GB
Enjoying Surround Sound
Understanding the multi channel surround displays
1 2 3 45
67890
MEMORY
L C R
SL
SW
LFE
DIGITAL DTS
PRO LOGIC II
ST
RDS OPT COAX
D.RANGE
MONO
S
SR
1 ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby
Digital format.
2 DTS: Lights up when DTS signals are input.
3 SW: Lights up when sub woofer selection is
set to YES (page 16) and the audio signal is
output from the SUB WOOFER jacks.
4 Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back.
The boxes around the letters vary to show
how the receiver downmixes the source sound
(based on the speakers settings). When using
sound fields like C.ST.EX, the receiver
adds reverberation based on the source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front/Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
5 Tuner indicators: Light up when using the
receiver to tune in radio stations, etc. See
pages 2629 for tuner operations.
Note
RDS only appears for models of area code
CEL, CEK only.
6 D.RANGE: Lights up when dynamic range
compression is activated. See page 24 to
adjust the dynamic range compression.
7 COAX: Lights up when the source signal is a
digital signal being input through the
COAX terminal.
8 OPT: Lights up when the source signal is a
digital signal being input through the OPT
terminal.
9 LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and when the sound of the
LFE channel signal is actually being
reproduced.
0 ; PRO LOGIC II: ; PRO LOGIC
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. ; PRO LOGIC II lights up when
Pro Logic II processing (PLII MOV or
PLII MUS) is applied (page 20). However,
both indicators do not light up if the center
and surround speakers are set to NO,
and A.F.D. AUTO, DOLBY PL,
PLII MOV or PLII MUS is selected.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding does not function for DTS format
signals.
SL SR
L
RC
GB06SOU_HT-SL55.p65 28/4/2003, 11:58 AM23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HT-SL40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HT-SL40 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony HT-SL40

Sony HT-SL40 Installation Guide - English - 2 pages

Sony HT-SL40 User Manual - Dutch - 216 pages

Sony HT-SL40 Installation Guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info