675666
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
GB
The remote control does not function.
Point the remote control to the
remote control sensor on the
Subwoofer (pages 8, 23).
Remove any obstacles in the path
between the remote control and the
Subwoofer.
Replace both batteries in the
remote control with new ones, if
they are weak.
Make sure you are pressing the
correct button on the remote
control.
The TV remote control does not work.
Install the system so that it does not
obstruct the remote control sensor
of the TV.
The Control for HDMI function does not
work properly.
Check the connection with the
system (refer to the supplied
Startup Guide).
Enable the Control for HDMI
function on the TV. For details, refer
to the operating instructions of your
TV.
Wait a while, and then try again. If
you unplug the system, it will take a
while before operations can be
made. Wait for 15 seconds or
longer, and then try again.
Make sure the devices connected to
the system support the Control for
HDMI function.
Enable the Control for HDMI
function on the devices connected
to the system. For details, refer to
the operating instructions of your
device.
The type and number of devices
that can be controlled by the
Control for HDMI function is
restricted by the HDMI CEC standard
as follows:
Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3devices
Tuner-related devices: up to
4devices
Audio system (receiver/
headphone): up to 1 device (used
by this system)
If “PRTCT” appears in the front panel
display of the Subwoofer.
Press to turn off the system. After
the display turns off, disconnect the
AC power cord (mains lead) then
check that nothing is blocking the
ventilation holes of the Subwoofer.
The front panel display of the
Subwoofer is not lit.
Press DIMMER to set the brightness
to “BRIGHT” or “DARK”, if set to
“OFF” (page 10).
Sensors of the TV do not work properly.
The system may block some
sensors (such as the brightness
sensor) and the remote control
receiver of your TV, or the “emitter
for 3D glasses (infrared
transmission)” of a 3D TV that
supports the infrared 3D glass
system or the wireless
communication. Move the system
away from the TV within a range
that allow those parts to operate
properly. For the locations of the
sensors and remote control
receiver, refer to the operating
instructions supplied with the TV.
Remote control
Others
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HT-RT3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HT-RT3 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony HT-RT3

Sony HT-RT3 User Manual - German - 104 pages

Sony HT-RT3 User Manual - Dutch - 104 pages

Sony HT-RT3 User Manual - French - 104 pages

Sony HT-RT3 User Manual - Italian, Polish - 104 pages

Sony HT-RT3 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info