419871
60
Zoom out
Zoom in
Previous page
1/68
Next page
60
GB
If you resume playback of a disc when
volume is maximum, there may be no sound.
In this case, turn down the volume, turn off
the system and turn on again.
Sound is interrupted or there is noise.
Check the output audio formats supported
by this system on page 62.
There is no picture or an unclear picture
appears on the TV screen.
Check that the TV is selected correctly.
Set the TV to the appropriate input mode.
Move your audio components away from the
TV.
If a video signal other than those supported
by the system is input, the image may be
distorted.
The source image input to the HDMI jack on the
subwoofer is not output from the TV.
Check the HDMI connection.
Depending on the playback component, you
may need to set up the component. Refer to
the operating instructions of each
component.
Use a High Speed HDMI cable. If you use a
Standard HDMI cable, 1080p images may
not be displayed properly.
Control for HDMI
The Control for HDMI function does not work.
Check the HDMI connection (page 12).
Make sure “CTRL: HDMI” is set to “ON” in
AMP menu.
Make sure the connected component is
compatible with the Control for HDMI
function.
Check the Control for HDMI settings on the
connected component. Refer to the
operating instructions supplied with the
connected component.
If you change the HDMI connection, or
connect/disconnect the AC power cord
(mains lead), or if there is a power failure,
repeat the procedures of “Preparing for the
“BRAVIA” Sync” (page 29).
The system may not work correctly if you
select a component that is not compatible
with the Control for HDMI function on the
TV side.
No sound is output from the system and the
TV’s speaker.
Check the volume of the system and the TV.
Select the input of the system correctly.
The sound is output from both the system and
the TV.
If the Control for HDMI function is set to off,
or the selected component is not compatible
with the Control for HDMI function, turn off
the sound of the system or the TV.
The System Power Off function does not work.
Change the setting of the TV to turn
connected components off automatically
when you turn off the TV. For details, refer
to the operating instructions of the TV.
An image does not appear on the TV.
Check whether HDMI IN and HDMI OUT
are connected correctly.
A message stating that the output method has
changed from the system speaker to the TV
speaker appears on the TV screen.
When the DMPORT function is selected, the
System Audio Control function does not
work (page 32).
When the system is in standby mode, there is
no image or sound on the TV.
When the system is in standby mode, image
and sound are output from the HDMI
component selected the last time you turned
off the system. If you are enjoying other
component, play the component and
perform the One-Touch Play operation, or
turn on the system to select the HDMI
component you want to enjoy.
Make sure “POWER SAVE” is set to “OFF”
in the AMP menu if you connect
components not compatible with the
“BRAVIA” Sync to the system (page 34).
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony ht fs3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony ht fs3 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony ht fs3

Sony ht fs3 User Manual - German, Dutch, Italian - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info