66332
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
GB
Control for HDMI
The Control for HDMI function does not work.
Check the HDMI connection (page 13).
Make sure “CTRL: HDMI” is set to “ON” in
AMP menu.
Make sure the connected component is
compatible with the Control for HDMI
function.
Check the Control for HDMI settings on the
connected component. Refer to the
operating instructions supplied with the
connected component.
If you change the HDMI connection, or
connect/disconnect the AC power cord
(mains lead), or if there is a power failure,
repeat the procedures of “Preparing for the
“BRAVIA” Sync” (page 25).
The system may not work correctly if you
select a component that is not compatible
with the Control for HDMI function on the
TV side.
No sound is output from the system and the
TV’s speaker.
Check the volume of the system and the TV.
Select the input of the system correctly.
The sound is output from both the system and
the TV.
If the Control for HDMI function is set to
off, or the selected component is not
compatible with the Control for HDMI
function, turn off the sound of the system or
the TV.
The System Power Off function does not work.
Change the setting of the TV to turn
connected components off automatically
when you turn off the TV. For details, refer
to the operating instructions of the TV.
An image does not appear on the TV.
Check whether HDMI IN and HDMI OUT
are connected correctly.
A message stating that the output method has
changed from the system speaker to the TV
speaker appears on the TV screen.
When the DMPORT function is selected, the
System Audio Control function does not
work (page 27).
Other
The remote does not function.
Point the remote at the remote sensor in
the front panel display.
Remove any obstacles in the path between
the remote and the front panel display.
Replace both batteries in the remote with
new ones, if they are weak.
Make sure you select the correct input on the
remote.
The volume turns down when the output
method changes from the TV speaker to the
system speaker.
The Volume Limit function is working. For
details, refer to “Using the Volume Limit
function” (page 28).
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
Use buttons on the system for this operation.
1 Press ?/1 to turn on the power.
2 Press INPUT SELECTOR, VOLUME
and ?/1 at the same time.
“COLD RESET” appears and the system is
reset. AMP menu, sound field, etc., return to
the default settings.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HT-FS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HT-FS1 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony HT-FS1

Sony HT-FS1 User Manual - German, Dutch, Italian - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info