419613
98
Zoom out
Zoom in
Previous page
1/108
Next page
98
GB
If you resume playing a disc when volume is
maximum, there may be no sound. In this
case, turn down the volume, turn off the
system and then turn it on again.
Sound is interrupted or there is noise.
Check the output audio formats supported
by this system (page 100).
There is no picture or an unclear picture
appears on the TV screen.
Check that the TV is selected correctly.
Set the TV to the appropriate input mode.
Move your audio components away from the
TV.
If a video signal other than those supported
by the system is input, the image may be
distorted.
The resolution setting may not be
appropriate. Use the “RESOLUTION”
menu in the system menu to change the
resolution setting until the picture on the TV
screen is satisfactory (page 95).
The GUI menu does not appear properly
when the resolution of the HDMI-connected
component’s video output is set to 480i or
576i. In this case, adjust the resolution of the
component’s video output to 480p or 576p,
or higher.
The source image (input via the HDMI jack) on
the subwoofer is distorted, interrupted or not
output from the TV.
Check the HDMI connection.
Depending on the playback component, you
may need to set up the component. Refer to
the operating instructions of each
component.
Use a High Speed HDMI cable. If you use a
Standard HDMI cable, 1080p or Deep
Colour images may not be displayed
properly.
Depending on the HDMI-connected
component, the image on the TV screen may
be distorted. In this case, set the [Video
Direct] setting in the [HDMI] menu to [ON]
(page 83).
There is a picture on the TV screen but no
sound.
Check that the audio assignable setting is
correct (page 81).
Control for HDMI
The Control for HDMI function does not work.
Check the HDMI connection (page 26).
Make sure [Control for HDMI] is set to [ON]
in the GUI menu.
Make sure the connected component is
compatible with the Control for HDMI
function.
Check the Control for HDMI settings on the
connected component. For details, refer to
the operating instructions of the component.
If you change the HDMI connection, or
connect/disconnect the AC power cord
(main lead), or if there is a power failure,
repeat the procedures of “Preparing for the
“BRAVIA” Sync” (page 59).
The system may not work correctly if you
select a component that is not compatible
with the Control for HDMI function on the
TV side.
No sound is output from the system and the
TV’s speaker.
Check the volume of the system and the TV.
Select the input of the system correctly.
The sound is output from both the system and
the TV.
If the Control for HDMI function is set to
off, or the selected component is not
compatible with the Control for HDMI
function, turn off the sound of the system or
the TV.
The System Power Off function does not work.
Change the setting of the TV to turn
connected components off automatically
when you turn off the TV. For details, refer
to the operating instructions of the TV.
An image does not appear on the TV.
Check whether HDMI IN and HDMI OUT
are connected correctly.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony ht ct500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony ht ct500 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony ht ct500

Sony ht ct500 User Manual - German, Dutch, Italian - 344 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info