36148
53
Zoom out
Zoom in
Previous page
1/60
Next page
Additional Information
masterpage:Right
lename[E:\SEM_Janet\Revision_HT-
950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm]
53
US
Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]
[2-549-736-12(1)]
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.
There is no sound or only a very low-level
sound no matter which component is
selected.
Check that the speakers and components are
connected correctly and securely.
Check that both the receiver and all components
are turned on.
Check that you have selected the correct
component on the receiver.
Check that MASTER VOLUME –/+ is not set at
“VOL MIN”.
Check that the SPEAKERS (OFF/A/B/A+B)* or
SPEAKERS (ON/OFF)** is not set to off
(page 41).
Check that the headphones are not connected.
Press MUTING on the remote to cancel the
muting function.
There is no sound from a specific component.
Check that the component is connected correctly
to the audio input jacks for that component.
Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
Check that you have selected the correct
component on the receiver.
There is no sound from one of the front
speakers.
Connect a pair of headphones to the PHONES
jack to verify that sound is output from the
headphones. If only one channel is output from the
headphones, the component may not be connected
to the receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both channels are
output from the headphones, the front speaker
may not be connected to the receiver correctly.
Check the connection of the front speaker which is
not outputting any sound.
There is no sound from analog 2 channel
sources.
Check that the INPUT MODE is not set to
“COAX IN” or “OPT IN” (page 35).
Check that you have not selected MULTI CH IN
function.*
There is no sound from digital sources (from
COAXIAL or OPTICAL input jack).
Check that the INPUT MODE is not set to
“ANALOG” (page 35). Check that the INPUT
MODE is not set to “COAX IN” for the sources
from OPTICAL input jack, or set to “OPT IN” for
the sources from COAXIAL input jack.
Check that you have not selected MULTI CH IN
function.*
The left and right sounds are unbalanced or
reversed.
Check that the speakers and components are
connected correctly and securely.
Adjust balance parameters in the LEVEL menu.
There is severe hum or noise.
Check that the speakers and components are
connected securely.
Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10
feet) away from a TV set or fluorescent light.
Move your audio components away from the TV.
The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
There is no sound from the surround back
speakers.
Some discs have no Dolby Digital EX flag even
though the packages have Dolby Digital EX
logos. In this case, select “SB ON” (page 38).
There is no sound or only a very low-level
sound is heard from the center/surround/
surround back speakers.
Select the CINEMA STUDIO EX mode
(page 31).
Adjust the speaker level (page 22).
There is no sound from the sub woofer.
Check that the sub woofer is connected correctly
and securely.
The surround effect cannot be obtained.
Make sure the sound field function is on (press
MOVIE or MUSIC).
Sound fields do not function for the signals with a
sampling frequency of more than 48 kHz.
* HT-9950M, HT-9900M and HT-6900DP only.
**HT-5950DP only.
Troubleshooting
continued
US01COV_HT-5950DP-CA.book Page 53 Monday, April 11, 2005 11:37 AM
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HT-9950M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HT-9950M in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info