36148
27
Zoom out
Zoom in
Previous page
1/60
Next page
Amplifier Operation
masterpage:Right
lename[E:\SEM_Janet\Revision_HT-
950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm]
27
US
Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]
[2--549-736-12(1)]
A SW: Lights up when the audio signal is output
from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B*: Lights up in accordance with
the speaker system being used (A or B). Turns
off when speaker output is turned off or when
headphones are connected.
* For HT-5950DP, “SP” lights up in the display.
D ; DIGITAL EX:; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 35).
E ; PRO LOGIC IIx:; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated.
Note
Dolby Pro Logic IIx decoding does not function
for DTS signals or for signals with a sampling
frequency of more than 48 kHz.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 35).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 24–26 for tuner operations.
I D.RANGE: Lights up when dynamic range
compression is activated (page 36).
J COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal or when INPUT MODE
is set to “COAX IN”
(page 35).
K OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal or when INPUT MODE is
set to “OPT IN
(page 35).
L SLEEP: Lights up when sleep timer is
activated.
About the indications in the display
L C R
SL
SB
SSR
LFE
SP A
DIGITAL EX
PRO LOGIC IIx
DTS-ES NEO:6
D.RANGE
SLEEP OPT COAX
96/24
SP B
;;
MEMORY
SW
STEREO MONO
9 8
qs
q
d
q;qa
2143* 567
continued
US01COV_HT-5950DP-CA.book Page 27 Monday, April 11, 2005 11:37 AM
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HT-9950M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HT-9950M in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info