60283
6
Zoom out
Zoom in
Previous page
1/24
Next page
6
Technical Features
Preset and user modes
When the monitor receives an input signal, it automatically matches the
signal to one of the factory preset modes stored in the monitors memory to
provide a high quality picture
(see Preset mode timing table on page i).
For input signals that do not match one of the factory preset modes, the
digital Multiscan technology of this monitor ensures that a clear picture
appears on the screen for any timing in the monitors frequency range (For
A240 horizontal: 30 70 kHz, vertical: 48 120 Hz and for A440
horizontal: 30 96 kHz, vertical: 48 170 Hz). If the picture is adjusted, the
adjustment data is stored as a user mode and automatically recalled
whenever the same input signal is received.
Power saving function
This monitor meets the power-saving guidelines set by VESA, ENERGY
STAR, and NUTEK. If no signal is received by the monitor from your
computer, the monitor will automatically reduce power consumption as
shown below.
* When your computer is in active off mode, MONITOR IS IN POWER
SAVE MODE appears on the screen if you press any button on the
monitor. After a few seconds, the monitor enters the power saving
mode again.
Troubleshooting
x No picture
If the 1 (power) indicator is not lit
Check that the power cord is properly connected.
Check that the 1 (power) switch is in the on position.
The 1 (power) indicator is orange
Check that the video signal cable is properly connected and all plugs
are firmly seated in their sockets.
Check that the HD15 video input connectors pins are not bent or
pushed in.
Check that the computers power is on.
The computer is in power saving mode. Try pressing any key on the
computer keyboard or moving the mouse.
Check that the graphic board is completely seated in the proper bus
slot.
If the 1 (power) indicator is green or flashing orange
Use the Self-diagnosis function.
x Picture flickers, bounces, oscillates, or is scrambled
Isolate and eliminate any potential sources of electric or magnetic
fields such as other monitors, laser printers, electric fans, fluorescent
lighting, or televisions.
Move the monitor away from power lines or place a magnetic shield
near the monitor.
Try plugging the monitor into a different AC outlet, preferably on a
different circuit.
Try turning the monitor 90° to the left or right.
Check your graphics board manual for the proper monitor setting.
Confirm that the graphics mode and the frequency of the input signal
are supported by this monitor (see Preset mode timing table on
page i). Even if the frequency is within the proper range, some
graphics board may have a sync pulse that is too narrow for the
monitor to sync correctly.
Adjust the computers refresh rate (vertical frequency) to obtain the
best possible picture.
x Picture is fuzzy
This monitor has a high luminance mode, so small characters may
not appear clearly if the monitor receives signals over 1280 × 1024
resolution. If this occurs, lower the contrast or set the computer to a
lower resolution.
Adjust the brightness and contrast.
Degauss the monitor.*
Adjust for minimum moire.
x Picture is ghosting
Eliminate the use of video cable extensions and/or video switch
boxes.
Check that all plugs are firmly seated in their sockets.
x Picture is not centered or sized properly
Adjust the size or centering. Note that with some input signals and/or
graphics board the periphery of the screen is not fully utilized.
Just after turning on the power switch, the size/center may take a
while to adjust properly.
x Edges of the image are curved
Adjust the geometry.
x Wavy or elliptical pattern (moire) is visible
Adjust for minimum moire.
Change your desktop pattern.
Power mode Power consumption
A240 A440
1 (power)
indicator
normal operation
100 W 130 W green
active off*
3 W 3 W orange
power off 0 W (Approx.) 0 W (Approx.) off
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony HMD-A240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony HMD-A240 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info