60164
69
Zoom out
Zoom in
Previous page
1/108
Next page
69
Troubleshooting
You cannot view the picture on the
TV connected with the i.LINK cable.
You cannot view the picture in the HD
(high definition) quality on the TV, if
an i.LINK jack of the TV is not
compatible with the HDV1080i
specification (p. 23). Refer to the
instruction manual supplied with your
TV.
Down convert the pictures recorded in
the HDV format and play back in the
DV format (SD image quality) (p. 56).
Play back pictures using another
connecting cable (p. 23).
You cannot hear the sound on the TV
connected with the S VIDEO plug
(S VIDEO channel).
When you are using an S VIDEO plug,
make sure the red and white plugs of
the A/V connecting cable are also
connected (p. 26).
You cannot view the picture or hear
the sound on the TV connected with
the component video cable.
Set [COMPONENT] according to the
requirements of the connected device
(p. 56).
When you are using the component
video cable, make sure the red and
white plugs of the A/V connecting
cable are also connected (p. 24, 26).
You cannot view the picture or hear
the sound on the TV connected with
the HDMI cable.
Pictures are not output from the HDMI
OUT jack, if copyright protection
signals are recorded in the pictures.
DV format pictures input to the VCR
via i.LINK cable (p. 28) cannot be
output.
This occurs if you record on a tape in
both of the HDV and DV formats.
Disconnect and connect the HDMI
cable, or set the POWER switch to ON
again.
The picture appears distorted on the
4:3 TV.
This occurs when viewing a picture
recorded in the 16:9 (wide) mode on a
4:3 TV. Set [TV TYPE] (p. 56) and
play back the picture.
Black zone appears at top and
bottom of a 4:3 TV screen.
This occurs when viewing a picture
recorded in the 16:9 (wide) mode on a
4:3 TV. This is not a malfunction.
Pictures from connected devices
cannot be magnified.
You cannot magnify pictures from
connected devices on the VCR (p. 36).
Time code and other information
appear on the display of the
connected device.
Set [DISP OUTPUT] to [LCD PANEL]
while connected with an A/V
connecting cable (p. 58).
You cannot dub pictures correctly
using the A/V connecting cable.
The A/V connecting cable is not
connected properly. Make sure that the
A/V connecting cable is connected to
the input jack of the other device for
dubbing a picture from the VCR.
Connecting to TV
Dubbing/Editing/Connecting to
other devices
Continued ,
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony GVHD700E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony GVHD700E in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony GVHD700E

Sony GVHD700E User Manual - German - 191 pages

Sony GVHD700E User Manual - Dutch - 203 pages

Sony GVHD700E User Manual - Italian - 191 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info