543630
13
Zoom out
Zoom in
Previous page
1/61
Next page
13
Location and Function of Controls
Overview
AUDIO input L (MONO)/R (phono
type)
Connect to the audio output of video
equipment. For stereo equipment use
both the L and R jacks; for monaural
equipment use the L (MONO) jack only.
2/3 INPUT A/INPUT B
Analog RGB connector (HD D-sub
15-pin, female)
Connects to external equipment such as
a computer.
Connects to the monitor output of a
computer using an optional cable.
AUDIO jack (stereo minijack)
To listen to sound output from a
computer, connect via this jack to the
audio output of the computer.
For details, see “Connecting a
Computer” on page 17 and
“Connecting a VCR” on page 19.
d OUTPUT
MONITOR connector (HD D-sub
15-pin, female)
Connect to the video input connector of
the monitor. Outputs signals from the
selected channel and computer signals
only from among the signals from the
INPUT A, INPUT B or INPUT C.
This connector does not output any
signals from the INPUT D connector.
AUDIO jack (stereo minijack)
Connects to external active speakers.
The volume of the speakers can be
controlled by the VOLUME +/– keys on
the Remote Commander.
When INPUT A, INPUT B or INPUT C
is selected, the sound input to the
AUDIO connector which is for
INPUT A, INPUT B or INPUT C is
output.
When VIDEO or S VIDEO is selected,
the sound input to the AUDIO input
connector of VIDEO IN is output.
e REMOTE
RS-232C connector (D-sub 9-pin,
female)
Connects to a computer to operate the
projector from the computer.
f AC IN socket
Connects the supplied AC power cord.
g CONTROL S IN/PLUG IN POWER
(DC 5V output) jack (stereo
minijack)
Connects to the control S out jacks of
Sony equipment. Connects to the
CONTROL S OUT jack on the supplied
Remote Commander when using it as a
wired Remote Commander. In this case,
when a stereo cable is used, you do not
need to install batteries in the Remote
Commander as the power is supplied
from this jack.
h INPUT C
Analog RGB/Component
connectors (R/R-Y/P
R, G/Y, B/B-Y/
P
B, HD, VD) (BNC type)
We recommend using this terminal when
signals are to be transmitted over greater
distance than usual, such as when the
projector is suspended from a ceiling.
Computer, component (R-Y/Y/B-Y),
HDTV or DTV (DTV GBR, DTV
YP
BPR) signal can be selected.
AUDIO (stereo minijack)
Connects to the audio output on a
computer.
i INPUT D
Digital RGB/Component
connector (HDMI) (accepts HDCP)
Connects to a video output connector on
video equipment or a computer
equipped with HDMI/DVI output
connector (digital).
j INPUT E
NETWORK connector (RJ-45)
Connects to the LAN cable when the
network function is in use.
CAUTION
For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to this port.
Follow the instructions for this port.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony FX40L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony FX40L in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info