Before Calling Service Personnel
64
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and Correction
Symptom
No power.
The power is on, but
the DVD player does
not work.
No picture on the
LCD or TV (including
video from another
unit).
Cause
• The power cord is disconnected.
• Hold switch is set to HOLD position.
• The battery is discharged.
• No disc is inserted.
• The video cable is not connected
securely.
• The AV LINE SELECT switch is not set
correctly.
• LCD mode is set to OFF.
•
Check that Brightness control is set to “–”.
• The TV is not set to receive DVD signal
output.
• The connected TV power is turned off.
Correction
• Plug the power cord into the wall out-
let securely.
• Release the hold mode.
• Recharge the battery.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the display win-
dow is lit.)
• Connect the video cable into the jacks
securely.
• Set the LINE SELECT switch correct-
ly.
- While you are playing a disc, set the
LINE SELECT switch to Out mode.
- While you are viewing video from
other equipment, set the LINE
SELECT switch to In mode.
• Select a LCD mode other than OFF.
• Adjust the brightness.
• Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the LCD
screen.
• Turn on the TV.
