30730
74
Zoom out
Zoom in
Previous page
1/96
Next page
74
Settings and Adjustments
Settings for the Sound (AUDIO SETUP)
AUDIO SETUP allows you to set the sound according
to the playback conditions.
The default settings are underlined.
Select AUDIO SETUP in the setup display.
x AUDIO ATT (attenuation)
If the playback sound is distorted, set this item to ON.
The player reduces the audio output level.
Selects the setting of the output from the AUDIO OUT
and LINE-1, 2 connectors according to the audio
equipment to be connected.
OFF: turns off the audio attenuation. Normally select
this position.
ON: reduces the audio output level so that no sound
distortion occurs. Select this when the playback sound
from the built-in TV speakers is distorted.
Note
The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL connectors.
x AUDIO DRC (Dynamic Range Control)
(DVD only)
Makes the sound clear when the volume is turned down
when playing a DVD. This function works only when
you play a DVD which has the AUDIO DRC function.
This affects the output from the DIGITAL OUT connectors
only when DOLBY DIGITAL is set to D-PCM and
MPEG is set to PCM in DIGITAL OUT.
STANDARD: Normally select this position.
TV MODE: makes the low sounds clear even if you turn
the volume down. It is especially recommended when
you listen to the sound using the speakers of the TV.
WIDE RANGE: It gives you the feeling of being at a live
performance. This function works only when you are
playing a Dolby Digital disc. When you use high
quality speakers, it is more effective.
Note
When you play DVDs without the AUDIO DRC function, there
may be no effect on the sound.
x DOWNMIX
Switches the mixing down methods when you play a
DVD on which rear signal components such as LS, RS or S
are recorded in Dolby Digital format. For details on the
rear signal components, see Displaying the audio
information of the disc (page 48).
The DOWNMIX setting affects the following
connectors:
AUDIO OUT connectors
DIGITAL OUT OPTICAL and COAXIAL connectors
(when you set DOLBY DIGITAL to D-PCM in
AUDIO SETUP in the setup display)
DOLBY SURROUND: when the player is connected to
an audio component that conforms to Dolby Surround
(Pro Logic). The output signals which reproduce the
Dolby Surround (Pro Logic) effect are mixed down to 2
channels.
NORMAL: when the player is connected to an audio
component that does not conform to Dolby Surround
(Pro Logic). The signals without the Dolby Surround
(Pro Logic) effect are output.
x DIGITAL OUT
Selects output signals via the DIGITAL OUT OPTICAL
and COAXIAL connectors.
ON: Normally select this position. When you select
ON, set DOLBY DIGITAL, MPEG, and DTS.
For details on setting these items, see Setting the
Digital Output Signal.
OFF: when the player does not output the sound signals
via the DIGITAL OUT OPTICAL and COAXIAL
connectors, the influence of the digital circuit upon the
analog circuit is at a minimum.
Notes
When you play sound tracks with a 96 kHz sampling
frequency, the output signals from the DIGITAL OUT
(OPTICAL, COAXIAL) connectors are converted to 48 kHz
(sampling frequency). The analog audio signals from the
AUDIO OUT connectors are not affected by this setting and
keep their original sampling frequency level.
When you select OFF, you cannot set DOLBY DIGITAL,
MPEG and DTS.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
To set, press , then .
To quit, press .
OFF
STANDARD
DOLBY SURROUND
ON
ENTER
DOLBY DIGITAL:
MPEG:
D-PCM
PCM
DTS:
OFF
DISPLAY
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DVPCX860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DVPCX860 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DVPCX860

Sony DVPCX860 User Manual - German - 96 pages

Sony DVPCX860 User Manual - Dutch - 96 pages

Sony DVPCX860 User Manual - French - 88 pages

Sony DVPCX860 User Manual - Italian - 96 pages

Sony DVPCX860 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info