60018
19
Zoom out
Zoom in
Previous page
1/96
Next page
19
Hookups
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from
your TV.
To connect to a TV with DVI input
Use an HDMI-DVI converter cord (not supplied). The DVI jack will not accept any audio
signals, so you have to use another audio connection in addition to this connection (page 20).
Furthermore, you cannot connect the HDMI OUT jack to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
To change the aspect ratio for the connected TV
Depending on the disc and the TV type (standard 4:3 screen TV or wide screen TV), the image
may not fit the TV screen. If this happens, change the aspect ratio (page 76).
z Hint
If your TV has a CONTROL S jack, you can control the player by operating the remote toward
the TV. This feature is convenient when you placed the player and the TV away from each other.
After connecting the player with other components according to the above A, B, C, or D,
connect the TV via the CONTROL S IN/IR IN using a Control S cord (not supplied). Refer to
the instructions supplied with the TV to be connected.
Notes
Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a
clear image on the TV screen.
Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case of 480 progressive scan picture problems, it is
recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding our TV set compatibility with this model 525p DVD player, please contact our customer service
centre.
When connecting to a progressive TV, it is recommended that you use only pattern C. If you connect to
your TV using both C and E, a special control signal transmitted via the SCART (EURO AV) cable may
cause the signal to be switched to the SCART (EURO AV) jack.
If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB
component jacks, set to t (Audio/Video) on your TV. When you select (RGB), the TV
cannot receive the signal from the VCR.
If you want to use your VCR’s SmartLink function, connect the VCR directly to your TV’s SCART (EURO
AV) jack and connect the player to the TV with another jack.
The SmartLink function may not work properly if your VCR is connected to your TV via the SCART
(EURO AV) jacks on the player.
When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set
to the player automatically when you start playback or press any button except for \/1. In this case, press
TV/DVD on the remote to return the input to the TV.
If you are connecting to an HDMI jack, use a Sony HDMI cord (not supplied).
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, open the tray and remove the disc.
VCR
CD/DVD player
TV
Connect
directly
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DVP-NS9100ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DVP-NS9100ES in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DVP-NS9100ES

Sony DVP-NS9100ES User Manual - German - 332 pages

Sony DVP-NS9100ES User Manual - Dutch - 444 pages

Sony DVP-NS9100ES User Manual - French - 332 pages

Sony DVP-NS9100ES User Manual - Italian, Polish, Swedish - 444 pages

Sony DVP-NS9100ES User Manual - Spanish - 332 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info