610365
174
Zoom out
Zoom in
Previous page
1/192
Next page
174
Maintenance information and precautions
Charging the vanadium-lithium battery in your camcorder
Your camcorder is supplied with a vanadium-lithium battery installed so as to retain
the date and time, etc., regardless of the setting of the POWER switch. The vanadium-
lithium battery is always charged as long as you are using your camcorder. The battery,
however, will get discharged gradually if you do not use your camcorder. It will be
completely discharged in about four months if you do not use your camcorder at all.
Even if the vanadium-lithium battery is not charged, it will not affect the camcorder
operation. To retain the date and time, etc., charge the battery if the battery is
discharged.
Charging the vanadium-lithium battery:
Connect your camcorder to house current using the AC power adaptor (not supplied),
and leave your camcorder with the POWER switch set to OFF for more than 24 hours.
Or install the fully charged battery pack in your camcorder, and leave your camcorder
with the POWER switch set to OFF for more than one hour.
Precautions
Camcorder operation
Operate your camcorder on 12 V to 17 V DC.
For DC or AC operation, use the accessories recommended in this operating
instructions.
If any solid object or liquid get inside the casing, unplug your camcorder and have it
checked by a Sony dealer before operating it any further.
Avoid rough handling or mechanical shock. Be particularly careful of the lens.
Keep the POWER switch set to OFF when you are not using your camcorder.
Do not wrap your camcorder with a towel, for example, and operate it. Doing so
might cause heat to build up inside.
Keep your camcorder away from strong magnetic fields or mechanical vibration.
Noise may appear on the image.
Do not touch the LCD screen with a sharp-pointed object.
If your camcorder is used in a cold place, a residual image may appear on the LCD
screen. This is not a malfunction.
While using your camcorder, the back of the LCD screen may heat up. This is not a
malfunction.
On handling tapes
Do not insert anything into the small holes on the rear of the cassette. These holes are
used to sense the type and thickness of the tape and if the recording tab is in or out.
Do not open the tape protect cover or touch the tape.
Avoid touching or damaging the terminals. To remove dust, clean the terminals with
a soft cloth.
Camcorder care
Remove the tape, and periodically turn on the power, operate the CAMERA and VTR
sections and play back a tape for about three minutes when your camcorder is not to
be used for a long time.
Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens,
remove them with a soft cloth.
Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of solvent which may damage the
finish.
174


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DSR-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DSR-250 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info