610365
60
Zoom out
Zoom in
Previous page
1/192
Next page
60
Using a video light
You can use the Anton Bauer Ultralight 2 or equivalent. Use a video light powered by
12 V with maximum power consumption of 30 W.
If you connect the video light to the LIGHT connector on the camcorder and set the
LIGHT switch to AUTO, you can turn the light on and off automatically as you start
and stop the recording.
The output of the LIGHT connector on the camcorder is controlled to 12 V even when
the camcorder is supplied with 12 V or more power (through the DC IN 12V
connector or battery pack). The brightness or color temperature of the light will not
change according to voltage increase.
(1) Attach a video light to the accessory shoe on the handle and connect the plug
of the video light to the LIGHT connector.
(2) Set the LIGHT switch as follows to control the video light:
AUTO: Turns on the video light during recording if the power switch on the
video light is set to on. (When in Tape Photo recording or using the cut
recording, the AUTO position is disable.)
MAN: The video light always turns on depending on the position of the VTR/
CAMERA/MEMORY selector. (When you insert or eject the cassette, the video
light momentarily turns on even if the POWER switch is set to OFF. To prevent
the video light from turning on, turn off the video light using its power
switch.)
Notes
Use a video light with 12-V power, and power consumption of 30 W or less.
The brightness or color temperature of the light will change by the input voltage when
the supplied voltage is under 12 V.
When the LIGHT switch is set to AUTO
Turning on/off the video light is synchronized with the recording start/stop operation.
The screen may momentarily glow in high-intensity according to recording conditions.
To prevent this phenomenon from occurring, shoot in one of the following ways:
Shoots in manual adjustment mode to fix the setting.
Turns on the video light and shoots with the LIGHT switch on the camcorder set to
MAN.
Accessory shoe
LIGHT switch
LIGHT
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DSR-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DSR-250 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info