610365
16
Zoom out
Zoom in
Previous page
1/192
Next page
16
Recording a picture
To turn off the TALLY lamps
When you turn off the TALLY lamp located on the viewfinder, set the TALLY switch
located on the front of the viewfinder to OFF, and when you turn off the TALLY lamp
located on the rear, set the TALLY switch located below the TALLY lamp to OFF. The
intensity of the front TALLY lamp can be chosen from high (HIGH) or low (LOW).
Note
Fasten the grip strap firmly.
Note on the progressive mode
If you intend to use the images on your PC or play the images back as still images, we
recommend that you set PROG. SCAN to ON in the menu settings before shooting (p.
120). The picture quality improves in this mode, but if you shoot a moving subject, the
image shakes when it is played back.
To enable smooth transition
Transition between the last scene you recorded and the next scene is smooth as long as
you do not eject the cassette even if you turn off your camcorder. When you use a tape
with cassette memory, however, you can make the transition smooth even after ejecting
the cassette if you use the end search function (p. 29).
However, check the following:
When you change the battery pack, set the POWER switch to OFF.
Do not mix recordings in the DVCAM format and the DV format on one tape.
If you record a tape in DV format, the transition of a tape may not be smooth. We
recommend that you use DVCAM cassettes and set REC MODE to DVCAM in the
menu settings to obtain reliable clear pictures.
Note on transition
The playback picture may be distorted or the time code may not be written properly
between scenes when you change the recording format on one tape.
If you leave your camcorder in standby mode for five minutes
The head drum of the camcorder automatically stops rotating. This is to prevent the
tape wear and save the battery power. To re-start recording, press the START/STOP
button. It may take more time to start recording. However, this is not a malfunction.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DSR-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DSR-250 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info